Tork Lift Stable Load Suspension Enhancement for a 2016 GMC Denali 3500

Question

Question:

I measured the space between the over load springs and the plate and its about 3 inches, will this give me enough room to install or will I have to customize torklift

asked by: Leonard

0

Expert Reply:

Tork Lift Stable Load # TLA7200 is designed for certain Ford and Dodge trucks but will not fit the 2016 GMC Sierra 3500 Denali. For your truck you would need # TLA7202. We had a customer install them on a 2016 3500 like yours and he had no problems. We had another customer who had a 2014 model and had to trim some material off the ends of the blocks to get them to fit. So they will work and may require a bit of modification in some circumstances.

expert reply by: Michael H

0

Answer 1

Hi Tharen! With the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs #TLA7200 installed on your unloaded 2026 Chevy Silverado 3500 (congrats on the new truck!!!), it will make the ride harsher, unfortunately. Upper overload springs…

view full answer...

Answer 2

You are going to want to trim the block down about an inch. We have seen this issue before on similar GMC trucks and if you don't trim the block down the suspension is going to feel incredibly rough. If you trim about an inch off and match the…

view full answer...

Answer 3

Hi Steve! For your 2024 GMC 3500 dually, you are going to want the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs #TLA7200. The TorkLift #TLA7202 is only a fit for 2015 GMC 3500 dually, so it isn't what you are looking for.…

view full answer...

Answer 4

Hey Todd, thanks for reaching out! What you're needing is the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs #TLA7200 for the bump stop style or the StableLoad #TL77QV if you're looking for the metal style with the quick…

view full answer...

Answer 5

Hey Craig, thanks for reaching out. Yes, they will! The TorkLift StableLoad Suspension Upgrade #TLA7200 will indeed work with the Timbren bump stops on your 2025 Chevy 3500HD. The StableLoads mount under the overload spring, while the bump stops…

view full answer...

Answer 6

The difference between the upper and lower Stableloads is the vehicle setup and because of that you can't install both at same time. The upper StableLoad like the part #TLA7200 is for versions of the 2021 Ford F-350 that have upper overload…

view full answer...

Answer 7

I am happy to report that the TorkLift StableLoad Suspension Upgrade #TLA7200 does not require drilling on your 2022 Ford F-250 super duty. I went ahead and attached a photo of from the instructional manual for you to check out. It is important to…

view full answer...

Answer 8

The thickness of the #TLA7200 block itself is 2.25" in height. The height of the anti rock plate is 9/16" in height.

view full answer...

Answer 9

Hey Jeffrey, unlike other places that maybe have lower prices on the #TLA7200 we can confirm that this does fit your 2021 GMC Sierra 3500. So while I totally understand price shopping hopefully having the confidence to know this does actually fit…

view full answer...

Answer 10

Hey Gabe, The TorkLift StableLoad Suspension Upgrade for Upper Overload Springs #TLA7202 is for older models ending in 2020 so you would need the #TLA7200 instead.

view full answer...

Answer 11

The correct TorkLift StableLoad Suspension Upgrade for the Upper Overload Springs on your 2023 Chevy Silverado 3500 short bed diesel is part #TLA7200. The other part you mentioned is for earlier years of the same truck. I confirmed this with TorkLift…

view full answer...

Answer 12

Using the TorkLift StableLoad Suspension Upgrade #TLA7200 does not wear out the overload springs at all. It does engage them earlier to help add more suspension support but that does not wear them out to any significant extent. Manufacturers…

view full answer...

Tork Lift Stable Load Suspension Enhancement for a 2016 GMC Denali 3500

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching