Dimensions for Replacement Barrel Nut for Yakima SkyBox Rooftop Box

Question

Question:

Hi, can you please provide the dimensions of these items Yakima # Y8870083? At least the diameter will do.

asked by: Kirill

1

Helpful Expert Reply:

The length of the Replacement Barrel Nut for the Yakima SkyBox Rooftop Box is 1-1/4 inches and the diameter is 7/16 of an inch. This barrel nut is designed as a replacement part for Yakima SkyBox Mounting Hardware. It fits a 1/4 inch - 20 size bolt.

I will attach an image for you.

expert reply by: Jon G

1

click to enlarge

Answer 1

You're looking for the Replacement Barrel Nut for Yakima SkyBox Rooftop Box #Y8870083, which according to my contact at Yakima is 1-1/4" long and has a 1/4"-20 thread pitch.

view full answer...

Answer 2

Thank you for all of the info and pictures! I forwarded them on to my contact at Yakima and it looks like you have the old SkyBox Pro 16 Silver 8007179. Even though this box has been discontinued we do have quite a few replacement parts for it: Cam…

view full answer...

Answer 3

The Replacement Barrel Nut for Yakima SkyBox Rooftop Box, part #Y8870083, is the same 8870083 barrel nut for the SkyBox. It measures 1-1/4" long, 7/16" wide, and has a thread pitch of 1/4"x20. This is the barrel nut that it sounds like…

view full answer...

Answer 4

The Yakima RocketBox Pro 14 Rooftop Cargo Box - 14 cu ft - Black #Y07192 has the nice push button latch with SKS system you are referring to, but unfortunately there is not a retrofit for the older boxes. To lock your box, I recommend the Replacement…

view full answer...

Answer 5

Thanks for the photo, and we have been told previously by Yakima that you can indeed change out the lock cores on the older cargo boxes with the SKS system, so you can use the Yakima Same Key System (SKS) Lock Cores #Y07202.

view full answer...

Answer 6

Is there a model name on the box anywhere? If the box has the SKS system, you would be able to use a control key, part #Y8007835 to remove the lock cylinder if it's currently unlocked. Insert the key and apply a little side pressure. If you could…

view full answer...

Answer 7

I reached out to my contact at Yakima and shared your photo. They said it is either a BlackTop 18 or 21 cargo box. I've attached the installation instructions to assist. I've attached a link to all of our Yakima replacement parts to help if…

view full answer...

Answer 8

The Yakima SkyBox 16 Roof Cargo Box is compatible with bars measuring up to 1-11/16" tall x 3-1/2" wide. The Yakima HD Crossbars like part #Y01159 measure 1-1/2" tall x 3" wide so they will be a fit for this cargo box. I…

view full answer...

Answer 9

I checked with Yakima and for your Skybox 16 the correct lid support for the rear is supposed to be part #8870072 and for the front is part #8870090. The picture you submitted shows a broken or twisted part #8870090 so that is what you'd need as…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Dimensions for Replacement Barrel Nut for Yakima SkyBox Rooftop Box

Product Page this Question was Asked From

Continue Researching