Do Brophy Camper Tie Downs HSSF Fit 2015 Ram 2500

Question

Question:

i have a 2015 dodge ram 2500 8foot bed with liner..will these work? If not do you have some that will?...thank you

asked by: William

0

Expert Reply:

Yes, the Camper Tie Downs part # HSSF that you referenced are a fit for your 2015 Ram 2500.

You will also need the hardware kit part # TDHP to attach the tie downs to the camper.

expert reply by: Jameson C

0

Answer 1

You don't need to change out your hitch. Since your 2020 Ford F-350 has the 3" receiver you can use the 36" TorkLift Cannon Hitch Extension item #TLE1636. This extension was designed specifically for the 3" receivers that come on…

view full answer...

Answer 2

Since you have running boards that run all the way to the rear, the only cusotm tie downs available for your 2021 GMC Sierra 1500 are for the rear using the TorkLift Camper Tie-Downs - Custom Frame Mount #TL54FR. To properly install your pop up…

view full answer...

Answer 3

To mount your camper in the bed of your 2002 Ford F-150, you can use the Brophy Camper Tie Downs, #TDSF, as long as your camper is not longer than 8 ft. These tie downs will install in the stake pockets on the top of your truck bed walls. If your…

view full answer...

Answer 4

While there isn't a specific weight capacity for the Brophy Clamp On Camper Tie-Downs #HSAB there is a 3,000lb capacity for the turnbuckles #TDHP that go along with these tie-downs. To ensure fitment of these tie-downs your truck will need to…

view full answer...

Answer 5

Hi Mark, thanks for the question and yes, the Brophy Slide In Camper Tie-Downs #HSAB for your 2024 Ram 3500 are sturdy enough for your Lance 825 slide-in camper. These will work so long as you do not have the RamBoxes in your truck, and while the…

view full answer...

Answer 6

Hey Jason, thanks for reaching out! We have a TorkLift tie-down kit for your 2022 Ford F-350 just as long as the electric running boards aren't wheel-to-wheel (I don't believe they are). The kit you referenced is for newer Super Duty pickups,…

view full answer...

Answer 7

The Brophy Angled Hold-Downs #HSAB, Camper Hold Down #HSSF, and the Camper Hold Down Zinc Finish #HSBP will all fit your 2015 Ram 3500. The types of truck beds these will not fit include step-side beds, some double-wall beds, some dually beds, most…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Hi Adam, The Brophy Stake Pocket Mounted Camper Tie-Downs #TDSF don't technically have a weight capacity, though the turnbuckles they need, the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs #TDHP, have a 3,000 lb weight capacity. So…

view full answer...

Answer 10

Hey James, The correct rear camper tie-downs to go along with your new TorkLift SuperHitch Original Trailer Hitch Receiver #TLD1102 are going to be part #TLR3505. These will mount directly to the hitch at the end of the crosstube.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Do Brophy Camper Tie Downs HSSF Fit 2015 Ram 2500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching