Width of the Lippert Kwikee Power Triple Step part # LC369552

Question

Question:

2008 Allegro 35ft. by Tiffin triple step 24in wide by 10/34 item number 9019613004 will your part # LC369552 bolt right in to replace? Thank You

asked by: George S

1

Helpful Expert Reply:

The steps of the Lippert Kwikee part # LC369552 that you referenced are 24 inches wide like what your Tiffin has. The outside distance of the mounting bracket is 25-1/2 inches though.

You would need to measure the width of your steps at the mounting bracket as well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

Hey Jairo. So we do not offer a direct replacement for the Norcold N611, but we do have a good replacement option for you. It really comes down to what will fit in your cutout space. Take a look at the Norcold RV Refrigerator w/ Freezer - 8.2 cu ft -…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hello Mel, great question! Yes, the Torklift tie downs part #TL66FV will fit your 2006 GMC Sierra 2500HD crew cab with the 8 foot bed, provided your truck does not have running boards or cab length boards that extend under the bed, and you are not…

view full answer...

Answer 4

Hey Steve, happy to help! The Victron MultiPlus II #VN43VR you're looking at can replace many of the functions of your Magnum MS2812, but there's an important difference with the AC connections. The #VN43VR has one AC input and two AC…

view full answer...

Answer 5

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 6

Welcome back Roger. To add a Class IV hitch to your 2002 Chevy Silverado 2500HD with an 8' bed, I recommend the Curt item #C14008. This is a custom fit hitch with a 2" receiver that is specifically designed for the 8' bed models with the…

view full answer...

Answer 7

Hey William, thank you so much for all of the information! To replace your axles, I recommend the Trailer Axle w/ Electric Brakes item #e73SR. This is a 6,000 lbs axle that come ready to install with pre-greased hubs and electric brake assemblies.…

view full answer...

Answer 8

Hi Randy; that part number corresponds with the OEM Chill Cube. At this time, there are no heat strips available from Furrion. They have said they are developing one, but it has been over a year with no word on an ETA. The only option for heat on a…

view full answer...

Answer 9

Hey Frank, thanks for reaching out! What Dexter Axle means by this is that you want the grease zerk fitting from the wet bolts in the Dexter E-Z Flex Suspension Kit #K71-653-00 to face the outside of the trailer, rather than under the trailer. I see…

view full answer...

Answer 10

Thank you for providing that information. Leaf springs like the ones you have now typically match the axle capacity on your trailer. Although adding leaf springs with a slightly higher capacity won't hurt, it also is not necessary. Based on the…

view full answer...

Answer 11

It sounds like you are looking for a u bolt kit for a 3,500 lbs axle. The 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long item #e57SR will work great for a tandem axle suspension system. For your ubolt kit you're going to…

view full answer...

Answer 12

Hi Austin, I can help you determine the right replacement double-eye leaf springs for your 2018 Jayco trailer, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure your…

view full answer...

Width of the Lippert Kwikee Power Triple Step part # LC369552

Product Page this Question was Asked From

Continue Researching