Recommended TorkLift SuperHitch for a 2016 Dodge Ram 2500 with Factory Hitch

Question

Question:

I have a 2016 Dodge Ram 2500 Laramie What Super Hitch fits this model. I am going to use the TLE1521 or the 24in extension.

asked by: Don W

0

Expert Reply:

Good news! The two TorkLift Super Hitch confirmed fit options for your 2016 Dodge Ram 2500 Laramie with factory hitch are the 2 inch # TLD1109 or 2-1/2 inch # TLD1109-30.

Since you plan on using the # TLE1521 or # TLE1524 you will most likely want the TorkLift 2 inch version # TLD1107.

I have linked all the above mentioned products to this page for your convenience.

expert reply by: Jackie C

0

Answer 1

Hey Ahmed. I've got a few options for extenders that will work with your Ram truck depending on what kind of hitch you have. If your 2014 Ram 2500 has a 2-1/2" hitch receiver, I recommend the Curt Hitch Extension and Reducer for 2-1/2"…

view full answer...

Answer 2

Hi Neil, It sounds like you're looking for the TorkLift SuperTruss extensions for your 2004 Ford F-250 to go with the TorkLift SuperHitch Original Trailer Hitch Receiver #TLF1002. If so, I'll go ahead and list out all of the SuperTruss…

view full answer...

Answer 3

The correct rear TorkLift Tie-Downs for the TorkLift SuperHitch Original Trailer Hitch Receiver #TLD1109 installed on your Ram 2500 is the Kit #TLR3507, which install directly to the side plates as you can see in the attached photo. With a standard…

view full answer...

Answer 4

Hi Alex; are you specifically looking for the TorkLift extension? The #TLE1636 is designed for the factory 3" receiver on Ford trucks. Do you have the TorkLift SuperHitch #TLD1109 on your Ram? If you do, the TorkLift SuperTruss Hitch Extension…

view full answer...

Answer 5

Hey Shawn, I really like that boat! If you didn't already I recommend actually measuring to make sure a 36" extension is really what you need. At 36" the only thing that can handle that kind of tongue weight is the TorkLift SuperTruss…

view full answer...

Answer 6

The only other extension that will meet your 36" requirement is the Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long #RP45018. This extension would have a maximum gross trailer weight of 7,500 lbs/750 lbs of…

view full answer...

Answer 7

It looks like you're trying to get a good sized hitch extender for your 2018 Ram 3500. The Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long part #RP45018 is designed to fit any 2.5" x 2.5" hitch it…

view full answer...

Answer 8

You are correct, the Torklift hitch part #TLD1108-30 that fits your 2017 Ram 3500 does put a hitch opening below your factory hitch to give you a heavy duty dual hitch setup.

view full answer...

Answer 9

Hey Kevin, thanks for reaching out again! The TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers #TLE1542 measure 42" from the center of on hitch pin hole to the center of the other hitch pin hole. I've attached an…

view full answer...

Answer 10

The Air Lift WirelessONE kits that use the remote control #AL39NV unfortunately aren't able to be converted from a single path kit to a dual path kit, so you'll need an entirely new compressor system according to my contact at Air Lift. Since…

view full answer...

Answer 11

Hey Scott, so the HappiJac Truck-Mounted Camper Tie-Downs item #LC182910-182971 actually does not have any weight capacity because they are designed to handle the weight of any truck bed camper. This also applies to any camper tie-down, which is why…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Recommended TorkLift SuperHitch for a 2016 Dodge Ram 2500 with Factory Hitch

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching