How Does Auto-Leveling Capability Simplify Installation of a Trailer Brake Controller

Question

Question:

cant id my brake controller its a voyager no model # on it. it looks like the 39510 what is the differance between the auto an manual leveling i have a 2002 gmc what wiring adapter do i need.thanks

asked by: Steve

1

Helpful Expert Reply:

The Tekonsha Voyager Proportional Trailer Brake Controller # 39510 will install in a 2002 GMC Sierra (if it is equipped with a factory 7-way) using quick-connect wiring adapter # 3025-P, which plugs in under the dash as shown in the linked video at the 4:54 mark.

A brake controller that offers automatic leveling, such as the Prodigy P3 # 90195, does not require that the mounting position be exactly straight in order for it to operate properly. The Voyager does require that it is mounted level and be pointed in the direction of travel. It has a manual knob for leveling. The auto-level feature can make it easier to install the controller since you have more flexibility.

The linked article on brake controllers will give you more information about the types available.

expert reply by: Adam R

1

Answer 1

The connector for the Tekonsha Plug-In Wiring Adapter #3070-P is located above the parking brake on your 2023 Honda Ridgeline. Even knowing where it is still proves difficult to get to the connector and attach the wiring adapter. I know several…

view full answer...

Answer 2

The Curt Echo Brake Controller part #C51180 is a great choice because of its convenient and simple installation. The 7-way connector that you mention part # A10-7084VP pugs into the 4-way connector you purchased part #C56217. The white wire from the…

view full answer...

Answer 3

Absolutely our Tongue Weight Scale #e99044 will work perfectly with your travel trailer! Our scale has a 2,000 lb capacity which you may think that a 5,000 lb trailer would be too much for our scale, but it's actually an ideal size trailer. What…

view full answer...

Answer 4

So it sounds like you are possibly trying to wire in a second 7-way to your 2014 Toyota FJ Cruiser. Which if that is the case the part #41157 would be what you would need. Or if you are just trying to install a 7-way in general on a vehicle that does…

view full answer...

Answer 5

Hey Ray, so we have the part #18159 which would work great to secure the 7-way of the #ETBC7L that you'll be installing with the Curt Echo #C51180. It's also pretty easy to install too.

view full answer...

Answer 6

Although the Tekonsha Prodigy P3 #90195 and Primus IQ #TK90160 electric brake controllers are very similar they do have some key differences as well. For one the P3 is designed to work with electric and electric over hydraulic brake systems. The…

view full answer...

Answer 7

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 8

The Curt Echo #C51180 picks up the brake lamp signal which then tells the controller that the brakes are being applied, and at the same time the internal accelerometer is telling the unit how quickly and with how much force the brakes are being…

view full answer...

Answer 9

There are a few differences between the Universal Installation Kit part #ETBC7 and the 7-Way RV Upgrade Kit part #ETBC7L. The biggest one is that part #ETBC7 comes with both the power and brake output wire you will need to run to the cab/battery…

view full answer...

Answer 10

The trailer brake output or blue wire is not connected on a 4 to 7-way adapter like the 4 to 7-Way with 4-Way Adapter part #ETBC7L when using a wireless trailer brake controller like the Curt Echo Wireless Brake Controller part #C51180. The two four…

view full answer...

Answer 11

The 12 volt power on the 7-way will not have enough juice for an electric winch so there's no way to use the 7-way like you wanted. The best option for your winch is really using a quick connect wiring kit, the Bulldog Winch Wiring Kit for…

view full answer...

Answer 12

I would be happy to help! Starting with the Curt Echo Wireless #C51180 it only activates the brakes based on the intensity you apply the brakes, and will not apply the brakes by hitting a bump in the road. I guess if you were to hit a rather large…

view full answer...

How Does Auto-Leveling Capability Simplify Installation of a Trailer Brake Controller

Featured Help Information

Miscellaneous Media

Continue Researching