7-Way Mounting Bracket for Use with ETBC7L and Curt Echo Mobile Brake Controller

Question

Question:

Hello! I believe I need a bracket to mount ETBC7L to my square bar U-Haul hitch on my 07 Touareg. Do you have a recommendation before I purchase this and the curt Bluetooth brake controller?

asked by: Ray F

0

Expert Reply:

Hey Ray, so we have the part # 18159 which would work great to secure the 7-way of the # ETBC7L that you'll be installing with the Curt Echo # C51180. It's also pretty easy to install too.

expert reply by: Jameson C

0

Ray F.

5/22/2024

Thanks, Jameson! My hitch is hidden under the bumper so not sure this would work. Any other options?

Reply

Jameson C.

5/22/2024

@RayF I'd attach it to the lower edge of the rear bumper with a bolt on bracket like the part # 18138 instead.

Reply

Ray F.

5/22/2024

@JamesonC does the ETBC7L come with a similar bracket? So technically I would be able to just use the provided bracket on the bumper? Just making sure I’m not buying extra parts

Reply

Jameson C.

5/22/2024

@RayF Yes it does. I should have mentioned that earlier sorry for the confusion.

Reply

Answer 1

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 2

Hi Jose; the slight curve on the #DT42GR is just how Draw-Tite decided to design the hitch. The same is true for the straight cross tube of the Curt #C96NR. The different designs don't really have an advantage over each other and they have the…

view full answer...

Answer 3

Graham, yes you can absolutely use the Curt Echo Wireless Brake Controller #C51180 with your 2021 Subaru Crosstrek. Since you only have a 4-pole though, you are also going to need to add the 7-Way RV Upgrade Kit for Trailer Brake Controller…

view full answer...

Answer 4

The etrailer.com brake set part #AKEBRK-35-SA that you referenced is a fit for your Dexter 3,500 lb axle. You will need to replace your current hub with hub/drums but aside from that you'd have all the parts needed.

view full answer...

Answer 5

It is possible to weld on a brake flange such as Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K #4-34 for 1-3/4" round axles, but it takes a qualified welder and even then it can be difficult to accomplish. A better solution is…

view full answer...

Answer 6

Since we know you have 3,500 lb axles we can pretty easily pick out the correct parts you'd need to add brakes to your trailer. You'd need new hubs that have integrated drums like with the part #AKHD-545-35-EZ-K which have the very common 5…

view full answer...

Answer 7

We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…

view full answer...

Answer 8

The 7-Way RV Upgrade Kit for Trailer Brake Controller Installation part #ETBC7L and the Universal Installation Kit for Trailer Brake Controller part #ETBC7 will both still charge your trailer's battery even when using the Curt Echo Mobile Trailer…

view full answer...

Answer 9

Sway control is designed to be used in situations where the trailer sways under adverse conditions such as high winds or when large vehicles are passing causing the trailer to become unstable. Sway control also helps if you have to maneuver suddenly.…

view full answer...

Answer 10

We actually have a version of the #ETBC7 that we put together specifically with the Curt Echo Mobile brake controller part #C51180 in mind with the #ETBC7L which comes with just the components needed for the Echo. The ETBC7 comes with the same…

view full answer...

Answer 11

Hey Ryan, so I looked up the Aliner LXE and it doesn't look like a trailer that would have brakes so most likely all you need is a 4-way confirmed as a fit for your 2024 Subaru Outback XT like the Tekonsha part #118467 which installs pretty…

view full answer...

Answer 12

Yes, our 7-Way Kit #ETBC7 will connect into your factory 4-way on your 2024 Subaru Crosstrek. This means you will not have to splice into the tail lights. The kit does include universal wiring for both a charge line and Brake Controller #RED52VR…

view full answer...

7-Way Mounting Bracket for Use with ETBC7L and Curt Echo Mobile Brake Controller

Products Featured in This Question

Continue Researching