Replacement Hardware for Trailer Hitch Reciver on a 2010 Volkswagen Jetta SportWagen

Question

Question:

I am looking for a replacement hardware kit for my trailer hitch. I have a 2010 VW JettaSportwagen. If you have anything could you please let me know, thanks very much for your time!

asked by: Connor B

0

Expert Reply:

Good news! I can help you get the correct hardware for your 2010 VW Jetta SportWagen trailer hitch.

We offer the Curt # C11474 for your vehicle or the EcoHitch # 306-X7284 if you have an older hitch we can check your orders or get information from the tag on your hitch. Depending on which hitch you have will indicate which "Hitch Item Number" you will place in the box on the Replacement Hardware Kit # RHK product page. Then simply purchase the kit and we will ship it to you.

It's possible that you have an older Hidden Hitch Brand trailer hitch on your SportWagen, the correct part number for this item is 60283. The Reese brand part number is 77249. The Draw-Tite was 24866.

I have linked the replacement hardware kit to this page for your purchasing convenience.

expert reply by: Jackie C

0

Answer 1

The Air Lift Air Shock Controller Compressor, part #AL25804 includes the onboard compressor; dash mounted gauge panel; hardware and air lines. An air tank isn't included. Since the compressor is manually operated from the dash panel, a pressure…

view full answer...

Answer 2

The Curt Hitch part #C11072 that you referenced is the correct Curt hitch to use on a 2011 Volkswagen Jetta SportWagen so this hitch will work for you. To order the missing install hardware you need to order part #RHK. On the product page you would…

view full answer...

Answer 3

They basically are the same. The part #C11474 is replacing the part #C11474. Basically they made the new hitch with some minor tweaks to allow it to fit the older and newer models. Either will work great for your 2006 Volkswagen Jetta non-diesel.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

The Air Lift 1000 Air Helper Springs for Coil Springs item #AL29PD are a universal fit. I spoke with my rep at Airlift. If the rear coil springs on your 2011 VW Jetta Sport Wagon measure just over 3-1/2" in diameter and 7" in length when…

view full answer...

Answer 12

HI RON! The EcoHitch Hidden Trailer Hitch item #306-X7284 is exactly what you need for your 2011 VW Jetta SportWagen. This hitch fits both the TDI and the gas engine Jetta's. This custom fit hitch has a 2" receiver and has a 2,000 lbs and…

view full answer...

Replacement Hardware for Trailer Hitch Reciver on a 2010 Volkswagen Jetta SportWagen

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching