Replacement Latch for Older X Cargo Box

Question

Question:

Hi, I have an xcargo carrier early 90s vintage with a broken rear latch. How do I determine which replacement latches to purchase? Thanks,

asked by: Matt

0

Expert Reply:

Thank you for the photos of your X Cargo Box!

Based on the latch shown in the photo, the correct replacement latch for your cargo box is part # 03347. I confirmed this is the replacement part you will want with my contact at Thule.

expert reply by: Victoria B

0

click to enlarge

Answer 1

For your Sears X-Cargo cargo box 300.7261 you can use latch #03347 that you have referenced. This latch fits many versions of the Sears X-Cargo boxes.

view full answer...

Answer 2

Only option we have that might work is the part #SR03807 for the lock and then the latches part #03347 as we know these fit the X-cargo boxes.

view full answer...

Answer 3

I am confident that the replacement latch #03347 will fit your Sears X-Cargo cargo box. It has been determined to fit on all sizes of the X-Cargo box with little or no modification of the box itself.

view full answer...

Answer 4

The correct replacement key for your Sears X-Cargo box is part #THKEYN2862. For a replacement latch, we know the Replacement Latch, #03347, will fit the newer models of the X-Cargo boxes that used the plastic latches, but we do not have exact…

view full answer...

Answer 5

The Replacement Latch for SportRack Explorer Cargo Box part #03347 will work as a replacement latch for your Sears X-Cargo Box. The appearances between the older style of latch will differ slightly from this replacement, however, it is a confirmed…

view full answer...

Answer 6

The X-Cargo boxes were manufactured by Thule's SportRack division for Sears. The correct replacement latch for your Sears X-Cargo Box is latch #03347.

view full answer...

Answer 7

We do have replacement latches for the Sears X-Cargo boxes with the part #03347.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Replacement Latch for Older X Cargo Box

Continue Researching