Prodigy P2 Brake Controller Flashing Between C and 0.0 and Not Applying Trailer Brakes
Published 05/26/2016
Question:
Hi, When I plug in my trailer, the controller quickly flashes back and forth between c and 0.0. If I apply the manual lever, theres no braking. It doesnt brake when the brake pedal is applied, either. Suggestions for troubleshooting?
asked by: Greg
0
Expert Reply:
The P2 brake controller # 90885 should read nc if no trailer is connected. It would flash 0.0 if the power output is set to zero. If you aren't getting any braking power it sounds like its' because your controller is turned all the way down. Try turning the knob up on top of the controller.
expert reply by:
Jameson C
0
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Flashing 0.0 and .C. on Primus IQ part # TK90160 Brake Controller
- Shop: Karrier ST225/75R15 Radial Trailer Tire with 15" White Wheel - 5 on 4-1/2 - Load Range C
- Shop: Karrier ST225/75R15 Radial Trailer Tire with 15" Black Steel Wheel - 6 on 5-1/2 - Load Range D
- Shop: Karrier ST225/75R15 Radial Tire with 15" Sendel Aluminum Wheel - 6 on 5-1/2" - LR E
- Shop: Karrier ST225/75R15 Radial Tire with 15" White Spoke Wheel - 6 on 5-1/2" - Load Range E
- Search Results: st225/75r15
- Search Results: st225 75 r15
- Q&A: Curt Discovery Brake Controller Is Only Showing A Dot When Engaging Manual Override
- Q&A: Help! Curt Discovery Trailer Brake Controller # C84VV Only Shows Decimal When Brake is Applied
- Shop: Brake Controller
- Q&A: What Does the SH Error Code and a Single Dot Mean on the Prodigy Break Controller, # 90885
- Q&A: Troubleshooting Flashing 00 On a Pilot Brake Controller When Brake is Applied
- Q&A: Troubleshooting Tekonsha Prodigy P2 Brake Controller Flashing C And Truck Not Starting
- Q&A: Chart With Error Codes Explained for the Prodigy P2 90885
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Troubleshooting Brake Controller Installations
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires