Flashing 0.0 and .C. on Primus IQ part # TK90160 Brake Controller
Published 10/19/2017
Question:
Is a flashing 00 alternating with .c. Ok?
asked by: Carol F
0
Expert Reply:
With the Primus IQ part # TK90160 the 0.0 means the controller isn't doing any braking and ".c." means you have the boost feature engaged. This means you have the braking power set to 0 and have the boost turned on.
You might check out the install instructions I attached and go through the setup process of the controller.
expert reply by:
Jameson C
0
Continue Researching
- Q&A: Prodigy P2 Brake Controller Flashing Between C and 0.0 and Not Applying Trailer Brakes
- Q&A: What Do the Codes Displayed on the Primus IQ Mean
- Shop: MB Sturgis Propane Pigtail w/ Back Check - RV Type 1 x 1/4" Male NPT - 2'
- Video: Curt 2 to 3 Wire Tail Light Converter: The Breakdown
- Shop: Vehicle Tow Bar Wiring
- Article: Trailer Wiring Diagrams
- Q&A: Troubleshooting Tekonsha Primus IQ Brake Controller Always Flashing
- Q&A: Troubleshooting Tekonsha Primus IQ Brake Controller Always Flashing
- Q&A: Troubleshooting Flashing Display on Primus IQ Trailer Brake Controller TK90160
- Q&A: Troubleshooting Flashing C on Display of Tekonsha Primus IQ Trailer Brake Controller TK90160
- Q&A: What Does The E.R Error Code On My Tekonsha Primus IQ Brake Controller Mean?