Replacement HADCO Seal ID 2.00 OD 2.87
Published 05/25/2016
Question:
I have an older model HADCO mobile home axle on a small utility trailer. I need to replace the grease seal on the back side of the hub. The existing grease seal is a black, rubberized seal with the number 310 9 stamped in it. The wheel bearing that is mated with the seal has a number 4T-LM501349 NTN Japan Ze. Finally the spindle diameter is about 2.00inch and the pocket the seal sits in on the hub has a diameter of about 2.87. Any suggestion on a replacement?
asked by: Brandon
Expert Reply:
The measurements from your spindle and hub line up with the HADCO seal # 1105-100-035 that you were looking at. This will work as a replacement to your seal on your axle.
Sounds like you were looking for a rubber coated one like the one that was originally on your axle.
The problem with mobile home axles are that they are designed for one-time use in moving a mobile home, and is meant to be discarded after that. Using mobile home axles and wheels seems like a great idea at the time folks are constructing a home made trailer. They are cheap and readily available. The problem is that replacement parts are usually not available, once again, because the axles are not meant to be reused.
I have linked the seal to this page for your convenience.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 2.00 Inch I.D.
- 2.88 Inch O.D.
- Redline
more information >
Continue Researching
- Shop: Grease Seal
- Search Results: trailer coupler locks
- Search Results: trailer hitch lock
- Search Results: trailer hitch ball mount
- Search Results: 7 way wiring harness
- Search Results: 7 blade flat tow wiring harness
- Q&A: Replacements For Hadco Trailer Axle With Hadco 3109 Hubs
- Video: A Closer Look at the etrailer Adjustable 2-Ball Mount - 2023 Ford F-150
- Search Results: trailer bearings races seals caps
- Q&A: Width of Redline Grease Seal # 1105-100-035
- Search Results: trailer harness
- Shop: Grease Seal
- Shop: 7-Way Molded Trailer Wire Connector, 4' Long
- Video: Ultimate Overview of the Grease Seal
- Shop: Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
- Shop: 7-Way Molded Trailer Wire Connector, 6' Long
- Q&A: How Long is the Cord # H20043?
- Shop: Replacement Race for LM67048 Bearing
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Q&A: What Does Yellow Wire of 7-Way Molded Trailer Wire Connector H20044 Wire To
- Q&A: Recommended Replacement Grease Seal for a 3109 Seal
- Q&A: How to Determine Correct Replacement For Hadco Hub
- Video: Let’s Check Out the Replacement Race for LM67048 Bearing
- Q&A: Is There a Hub Conversion Kit for Mobile Home Trailer Axles