Replacement Hub and Brake Assemblies for 2007 Stellar Triple Axle Toyhauler w/ Lippert 6k Axles
Updated 05/19/2016 | Published 05/16/2016
Products Featured in This Question
Question:
I have a 2007 stellar 37foot triple axle toyhauler w/ lippert 6k lc160 axles, nv# 37783, s/n 324333. I need 6 brake assy which were axletek-12gg, p/n b12e-01 and b12e-02. I also need 1 hub assy w/ bearings and all, installed were axletek bd-865-16 w/ 1/2inch studs. Was thinking of going with self-adjusting brakes now. dexter or axletek, which do you recommend?
asked by: Mark V
Helpful Expert Reply:
Based on the numbers you mentioned and the fact that you have a Lippert 6k axle I was able to determine that you need the # AKHD-865-7-G-EZ-K as a replacement hub and drum. This comes with the same 8 on 6-1/2 inch bolt pattern you have with 1/2 inch diameter studs.
Then for self adjusting brake assemblies you need the part # AKEBRK-7L-SA for the left hand side and part # AKEBRK-7R-SA for the right. Self-adjusting brakes are the way to go. Once installed and allowed to self-adjust you would never have to mess with brake adjustments again. These etrailer parts are all made by AxleTek and would work very well.
Dexter products are top-notch as well. But the AxleTek components will work great as well.
Product Page this Question was Asked From
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: trailer brakes
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Easy Grease Trailer Hub and Drum for 5.2K to 7K Axles - 12" - 8 on 6-1/2 - Galvanized
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly for Lippert ABS System - 7K Axles - 12" - 8 on 6-1/2
- Q&A: Recommended Hubs And Brakes For A Lippert 7,000 lb Axle
- Q&A: Need 8-Lug Brake Drum For 2005 Keystone Montana
- Q&A: How to Find Which Trailer Brake Assembly Goes on the Left or Right Side of a Trailer
- Q&A: Can I Swap My Coleman Mach Q 15 to the Furrion Chill with an Adapter, or do I Need a New Set-up?
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer tires and wheels
- Video: How to Choose a Trailer Brake Controller
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: trailer jack
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Shop: Brake Controller
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Measuring To Choose The Right Trailer Axle
on Accessories and Parts
