Will Draw-Tite # 24795 Fit my 2010 Hyundai Elantra with a Recovery Tow Loop
Updated 05/16/2016 | Published 05/15/2016
Products Featured in This Question
Question:
I have a 2010 Hyundai Elantra and want to confirm 60872 will fit the vehicle. It has a recovery tow loop that is welded to the bottom on the unibody and I am concerned it will interfere with the hitch installation see attached photos. Thanks.
asked by: Marc T
Expert Reply:
The Draw-Tite hitch #24795 will fit your 2010 Hyundai Elantra as long as it is the Sedan model. We have test fitted the product on a Hyundai Elantra with a tow loop and I attached photos of the hitch on the vehicle. The hitch sits right in front of the tow loop and it does not interfere with the use or installation of the hitch. If your Elantra is a Touring Hatchback, this hitch will not fit and you will need Draw-Tite Hitch Receiver #24844.
This hitch has a powder coat finish to ensure superior corrosion resistance. A pin and clip are included with the hitch. It is designed for light-duty applications and lets you tow a trailer or carry a bike rack on the back of your Hyundai Elantra. If you are planning on using the hitch for towing you will need a wiring harness. If you have a sedan model I recommend T-One Vehicle Wiring Harness with a 4-Pole Connector # 118433. If you have a Touring model, I recommend T-One Wiring Harness # 118473. You will also need a hitch ball to tow a trailer. I recommend the 1-7/8 Inch Ball # 19256. I have linked our help article on tips for trailer hitch installation.
I have attached a video installation for the Draw-Tite hitch on a 2010 Hyundai Elantra you may want to check out. The installation for the Hidden Hitch you are looking at is the same for the Draw-Tite hitch I attached the video for. I have also linked our help article on tips for trailer hitch installation you may want to check out.
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- For Towing
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Search Results: wiring
- Search Results: curt
- Search Results: harness
- Search Results: ball mount
- Q&A: Trailer Hitch for a 2010 Hyundai Elantra Sedan
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Search Results: custom fit vehicle wiring
- Video: Install: Draw-Tite Sportframe Trailer Hitch Receiver on a 2008 Hyundai Elantra
- Video: Installation Guide for the Draw-Tite Sportframe Trailer Hitch Receiver on a 2010 Hyundai Elantra
- Q&A: Difference Between The Curt C11092 And The Draw-Tite Sportframe 24795 Trailer Hitch
- Q&A: Hitch Pin Hole to Bumper Edge Distance of Draw-Tite 24795 Hitch Installed on 2010 Hyundai Elantra
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Q&A: Which Vehicles Does Draw-Tite Sportframe Trailer Hitch Receiver 24795 Fit
- Q&A: Trailer Hitch Recommendation for 2008 Hyundai Accent for Ground Clearance
- Q&A: Install Video for Draw Tite Trailer Hitch that Fits 2010 Hyundai Accent
- Q&A: Where Does a Stabilizing Strap Attach for a Cargo Carrier and CURT Trailer Hitch, 2009 Toyota Prius
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class