Do Draw-Tite Trailer Hitches # 41904 and # 41004 Mount in the Same Places on a 1994 Ford F-350

Updated 08/12/2010 | Published 08/11/2010

Products Featured in This Question

Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

(20)

$284.36

Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class IV - 2"

(47)

$212.15

Question:

94 F350 srw non- bumper. does the 41904 and 41004 have the same bolt pattern to the truck frame? i am replacing an existing drawtite hitch i believe it is a 41904

asked by: Clayton

Expert Reply:

I went out to measure both Draw-Tite Trailer Hitches, # 41904 and # 41004. They will not use the same mounting locations.

On # 41904, the center to center distance between the two closest bolt holes is 4-3/4 inches. Between the center bolt hole and the farthest it is 9 inches. This hitch has 9/16 inch bolt holes.

On # 41004, the center to center distance between the two closest bolt holes is 5-3/4 inches. Between the center bolt hole and the farthest it is 8 inches. This hitch has 1/2 inch bolt holes.

I have included a link to the installation details for both of these hitches below.