Replacement Cradle Recommendation for a Ascent 1600

Question

Question:

Are these the correct cradles for the Thule Ascent 1600?

asked by: Peter

0

Expert Reply:

I checked with Thule and the part # TH8523387001 is the correct replacement cradles for your Thule Ascent 1600.

expert reply by: Jameson C

0

Answer 1

The Replacement Lid Lifter Hinge for Thule Cargo Boxes, #TH14936, is what you need for your Thule Force XL box. The strap you are most likely looking for is the Replacement Tie-Down Strap for Thule Roof Mounted Cargo Boxes, #10169. If you are looking…

view full answer...

Answer 2

Can you please send me a photo of the box and include any markings if present?

view full answer...

Answer 3

I pulled a Replacement Tie-Down Strap #10169 from our warehouse to measure for you and found that it measures 9 feet 8-1/2 inches if you measure from the end of the strap all the way to the end of the plastic buckle, and that if you measure just the…

view full answer...

Answer 4

I checked with Thule, and the correct replacement clamps for a Thule Ascent 1700 cargo box are the Quick Grip clamps: - Replacement Quick Grip Mount Assembly - Thule Ascent, Atlantis, and Force Cargo Box - Qty 1 #TH05738 These are just the clamps so…

view full answer...

Answer 5

For cradles for your Thule Ascent 1600 you'd want the part #TH8523387001.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Cradle Recommendation for a Ascent 1600

Product Page this Question was Asked From

Continue Researching