Replacement Truxedo Shur-Bond Velcro Brand Fastener For 8 Ft Lo Pro Tonneau Cover

Question

Question:

I purchase the Replacement Truxedo Shur-Bond Velcro Brand Fastener Code: TX1117876. I can not figure out how it fastens to the plastic strips that come off the bed rails and the Velcro itself is not wide enough to fit directly into the bed rail? Can you help me

asked by: Mike C

0

Expert Reply:

The Replacement Truxedo Shur-Bond Velcro Brand Fastener, part # TX1117876 is designed to work with TruxSport tonneau covers only. From the photo you sent it looks like you have a Lo Pro tonneau cover on your truck.

The correct replacement Velcro for your Lo Pro system is part # TX1115173. This is for 8-ft truck beds and is 1-1/4 inches wide, which will slip right into the track on your truck bed rails.

expert reply by: Jeffrey L

0

click to enlarge

Answer 1

Hey Dan, thanks for the information! We've actually ran into this exact situation before with the Chevy tonneau covers. The Replacement TruXedo TruXport Shur-Bond Hook-And-Loop Fastener Strips for 6-1/2' Beds item #TX1117876 can be used…

view full answer...

Answer 2

Hey Mike, welcome back! Both the Firestone Ride-Rite #F2613 rated for 5,000 lbs, and the Firestone Ride-Rite Red Label #F2709 rated for 7,500 lbs will keep you at factory ride height when you aren't towing. All you need to do is run the air bags…

view full answer...

Answer 3

There are a couple of different models of TruXedo soft roll-up tonneau covers that fit your 2007 Dodge Ram 1500 short bed. All of them are shown on the linked page. If your cover happens to mount on top of the bed rails (rather than inside them) as…

view full answer...

Answer 4

If you have the 8' bed then you can go with Replacement Truxedo Shur-Bond Velcro Brand Fastener for 8' Beds - 1" Width #TX1117877. If you have the 6-1/2' bed then you will want to go with Replacement TruXedo Shur-Bond Hook-And-Loop…

view full answer...

Answer 5

You measured correctly and the Velcro strip you need for your short bed Ram's Lo Pro QT cover is part #TX1115174 which is 1-5/16-inches wide.

view full answer...

Answer 6

We have replacement tonneau cover Velcro that is exactly 1-5/16 inches wide with the Truxedo part #TX1115174 which would fit your rails. It can be cut down shorter too as it is 80 inches long.

view full answer...

Answer 7

I have a solution for you, and the strips that you're referring to are going to come in a couple different sizes, but none of them are going to be 1-1/16" wide. The #TX1117876 strips you're referring to are 1" wide, which have the…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

So long as your 2020 Chevy Silverado 1500 is a gas version and not a diesel, then the EcoHitch front hitch you asked about does indeed fit, with the correct part number being the following: - EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH58RR…

view full answer...

Replacement Truxedo Shur-Bond Velcro Brand Fastener For 8 Ft Lo Pro Tonneau Cover

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching