Can Manual Crank Vents In Motorhome Be Converted To Powered Vents

Question

Question:

I currently have two manual crank-up style roof vents in my motor-home and both have the enclosed wind deflector mounted over them on the roof. I dont want to remove all that stuff already mounted up there, I just want to retrofit a new 12vdc fan somehow on the inside of the rv to remove hot air thru the existing vent hole.

asked by: Mike P

0

Expert Reply:

In order to convert your manual operated vents in your motorhome, and the brackets and hardware that would allow you to convert their vents is very limited. We do not currently carry those parts in stock so I would need the make and model of your vents to try and locate parts that would work.

You may be better off replacing a vent with a vent that has a motor already included like part # V2094SP-30. This is a 14-1/2 x 14-1/2 inch fan with a 12 V motor and white lid. The on/off switch is included and mounted on the vent.

expert reply by: Jeffrey L

0

Answer 1

Yes, the Dexter E-Z Lube Axles still require cleaning and repacking of the bearings every 12 months or 12,000 miles. The zerk fittings on the end of the spindle are to add new grease in between maintenance intervals but they are not designed to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hello Tom, Thanks for writing in. You are correct. I would not recommend using the B&W Digital Tongue Weight Scale #BW34KR with a McHitch coupler. The McHitch uses a different coupling design than a standard ball coupler, and I cannot confirm…

view full answer...

Answer 8

Hey Gregory, that's really good information. You’ve got a few options, but I wouldn’t jump straight to replacing the leaf springs on a half-ton for that size trailer. Since you’re using a Curt weight distribution hitch, that should be doing most…

view full answer...

Answer 9

Hello Dan, Great question. When you’re comparing the Firestone kits #F59VV and #F2582, they both technically fit your 2025 F-150, but they are designed around different mounting locations and truck configurations. The #F2582 is the traditional…

view full answer...

Answer 10

Hi Jeff, The K-Source Snap & Zap Custom Towing Mirrors part #KS69NQ will work with your Lariat mirrors while allowing you to retain the use of the camera and side lights! These mirrors are specifically designed to match the contours of the side…

view full answer...

Can Manual Crank Vents In Motorhome Be Converted To Powered Vents

Product Page this Question was Asked From

Continue Researching