Do I Have to Remove the Spring Hangers/Stock Saddles to Install the Timbren Silent Ride Suspension?
Updated 04/07/2026 | Published 04/06/2026 >
Products Featured in This Question
Question:
TSR2000S04 So these won't work with the stock saddles? We do have to grind them off and weld on the new saddles?
asked by: Robert
Expert Reply:
That is correct Robert. Your old saddles or spring hangers are most likely going to be in the way so you'll have to remove them and then grind down the welds to install the Timbren Silent Ride Suspension item # TSR2000S04. You'll want to get the frame as smooth as possible especially if you're welding.
The Silent Ride Suspension item # TSR2000S04 can be either welded or bolted onto your trailer using the built in brackets. This system is designed for single-axle trailers with 1-3/4" diameter axle. It has a 2,000 lbs capacity.
What kind of trailer do you have?
You can add this information, along with any other questions you have, where it says Add Comment.
Product Page this Question was Asked From
Timbren Silent Ride Suspension for Single Axle Trailers w/ 1-3/4" Round Axles - 2,000 lbs
- Trailer Suspension Parts
- Leaf Spring Replacement System
- Camper
- Car Hauler
- Utility Trailer
- 2000 lbs
- Round Axle - 1-3/4 Inch
- Single Axle
- Timbren
more information >
Continue Researching
- Video: Roadmaster Comfort Ride Trailer Suspension Shock Absorber Install - 2021 Keystone Montana Fifth Whee
- Search Results: trailer shocks
- Search Results: diode dynamics off road lights
- Search Results: platform rack roof rack
- Search Results: roof rack
- Search Results: kuat roof rack
- Search Results: trailer axles
- Search Results: stabilizer jack handle
- Shop: Timbren Silent Ride Suspension for Single Axle Trailers w/ 2-3/8" Round Axles - 2,000 lbs
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Shop: Kuat DEK Platform Rack w/ Light Bar - Fixed Mounting Points - 47" wide 93" long
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Drop - 4 Bolt - 2K
- Q&A: Replacement Axle Options for a Harbor Freight 4’x8’ Folding Utility Trailer 62671
- Video: Timbren Trailer Suspension - Cushioned Suspension - TSR2000S04 Review
- Video: In-Depth Look at the Kuat DEK Roof Platform Light Bar
- Shop: Roof Rack
- Shop: SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Underslung
- Shop: Timbren Silent Ride Suspension for Single Axle Trailers w/ 1-3/4" Round Axles - 2,000 lbs
- Shop: Karrier ST175/80R13 KR53 Radial Trailer Tire - Load Range C
- Video: Timbren Axle-Less Trailer Suspension DIY Installation - Boat Trailer
- Q&A: Recommendations For a Smoother Ride With a 12' Boat Weighing Only 500lbs On Single Axle Trailer
- Q&A: Which Axle for Homemade Trailer
- Q&A: Do the Timbren Silent Ride Suspension Systems Require a Crossmember
- Q&A: Availability of 2,000 Pound Timbren Axle-Less System with 6 Hub Face Dimension
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring


