Replacement Bunks Needed for 18 Ft Klamath Aluminum Boat on Hanson Trailer
Updated 07/16/2015 | Published 07/15/2015
Products Featured in This Question
Question:
Hi, I have a little bit of a mismatch, but the trailer was free. Currently there is a 4 bunk configuration for the 19foot sea swirl that was on the Trailer prior to my ownership. Im putting a 18foot Klamath aluminum boat. The rear bunks are 5foot and sitting toward the outside or nearer the gunwales than the front bunks which are 56. All bunks are 2X6. I want to replace them with just 2 - 2X4 bunks. Do you make longer than 5? I guess I could run 45. Let me know your thoughts.
asked by: Mike
Expert Reply:
The longest boards that we offer are going to be the CE Smith Carpeted Bunk Boards, # CE27840, which measure 6 ft long. I have included a link to all of our carpeted bunk boards for you. The bunk boards can be mounted to existing brackets on the trailer or you can use the CE Smith Bolster and Swivel Bracket Assemblies, # CE10000G-4, which would attach to the trailer frame and allow for height and angle adjustment.
Product Page this Question was Asked From
CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long - 1 Pair
- Boat Trailer Parts
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 60 Inch Long
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Video: Measuring To Choose The Right Trailer Axle
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Search Results: trailer wiring
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Brake Controller
- Video: How to Choose a Trailer Brake Controller
- Search Results: trailer jack
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Article: Trailer Lighting Requirements
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer leaf springs
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Search Results: trailer lights
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
on Boat Trailer Parts
