Eaz Lift Weight Distribution Drop Shank Recommendation

Question

Question:

I currently have a Eaz Lift Weight Distribution hitch and recently sold a Toyota Tacoma in exchange for a RAM 2500 4x4 which is significantly higher than my old truck. Will this work with this hitch?

asked by: Scott D

0

Expert Reply:

The Reese Shank part # RP3215 that you referenced has 3/4 inch holes that are spaced 1-1/4 inches apart. If the head of your Eaz system is compatible with that this shank would work well for you.

Nearly all WD system use the same hole dimensions. We have found that almost all brands can use each others shanks.

expert reply by: Jameson C

0

Answer 1

The difference between the 2007 Chevy Silverado 2500 and the 3500 series trucks is the weight capacity. The 3500 is going to have a higher weight capacity than the 2500. I spoke with the engineer at Timbren and he told me that the TImbren part…

view full answer...

Answer 2

The Timbren Rear Suspension Springs, #TGMRCK25S, will install on your 2000 Chevrolet Silverado LS 2500 HD without needing to drill new holes. The top of the mounting brackets for the Timbren springs have two holes that will use the existing holes…

view full answer...

Answer 3

Timbren likes to recommend 1 inch between the axle and the Timbren when the truck is unloaded. We have found that this works the best. This allows the suspension to feel when the vehicle is unloaded and still gives you support when needed when…

view full answer...

Answer 4

Hello Xiaoming, Yes, we do have the Dexter K71-622-00 available, though it's under a different part number for our site. What you need is the following: - Dexter Replacement Trailer Axle Spindle Retainer Kit #DX82CR This includes two D washers,…

view full answer...

Answer 5

For a 2007 Chevrolet Silverado CLASSIC, there is a "Select Vehicle Style" drop-down menu where you can select "3500 - Pickup" or "3500 Pickup w/ 10" DeepDrop bumper" If you have the DeepDrop bumper then you can use…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Eaz Lift Weight Distribution Drop Shank Recommendation

Featured Help Information

Miscellaneous Media

Continue Researching