Will Roadmaster EZ2 Base Plate 1-1/4 Inch Receiver Covers # RM-212 Fit EZ Base Plate Kit # 523145-5

Question

Question:

Will these caps fit your Roadmaster Mounting Bracket Kit 523145-5

asked by: Jo

1

Helpful Expert Reply:

Yes, the Roadmaster EZ2 Base Plate 1-1/4 Inch Receiver Covers, # RM-212, will fit the Roadmaster EZ Base Plate Kit, # 523145-5.

I spoke with my contact at Roadmaster to confirm this.

expert reply by: Leah S

1

Answer 1

Yes, they do! The correct receiver cover for the Roadmaster Direct-Connect Base Plate Kit item #RM-521448-5 is the Roadmaster EZ2 Base Plate 1-1/4" Receiver Covers item #RM-212.

view full answer...

Answer 2

Hey Scott, the correct Roadmaster Tow Defender to use with your base plate kit #RM97RR is the part #RM-4750 which was designed to be used with Direct Connect kits like you have.

view full answer...

Answer 3

For your application I recommend installing the Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Wire Hybrid Cord #RM-152-1676-7 on your 2022 Jeep Wrangler because of the excellent diodes that help to protect your vehicle wiring. Then for a…

view full answer...

Answer 4

So a couple things here, as by blind spot indicators I believe you are referring to the ParkSense feature on your 2022 Jeep Gladiator. If so, you would not be able to use the Demco #DM9523010-54. The issue is that the brake and running lights will…

view full answer...

Answer 5

There currently isn't a compatible Blue Ox base plate for your 2022 Jeep Wrangler Sahara. There is however the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 which is a compatible fit (standard factory bumpers). These base plates have a…

view full answer...

Answer 6

I do have an installation video of base plates being install on a 2020 Jeep Wrangler Unlimited which I have attached for you. However, we have not yet had the opportunity to install the Roadmaster Direct-Connect Base Plate Kit part #RM-521453-5 on a…

view full answer...

Answer 7

Hey Don, So the Roadmaster #RM35GR only fits Jeeps with that have a factory steel bumper that has a winch on it. Your 2024 Jeep Wrangler Sahara won't have that so the correct base plates are the Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Will Roadmaster EZ2 Base Plate 1-1/4 Inch Receiver Covers # RM-212 Fit EZ Base Plate Kit # 523145-5

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching