Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Protect your base plate from rust and dirt while helping it to blend into the front trim of your vehicle. Rubber caps plug right into the base plate receivers to keep them clean and ready to use.
Features:
Specs:
Note: May need to trim inserts to fit certain base plate models.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
It's Brad here at etrailer, and today we're taking a look at the Roadmaster base plate covers. And you can see we have 'em installed here on our Jeep and they're gonna be available in two different sizes. We have an inch and a half as well as an inch and a quarter, depending on which base plate your vehicle uses. Now in flat-towing your vehicle you're gonna have your arms in place so you don't have to worry about anything getting in there but your car is still your car. So when you have this all unhooked you're gonna be left with some open holes, otherwise you're gonna be leaving your arms in place which I don't really suggest because if someone comes by and decides to take it, well, you're not gonna be able to hook up your vehicle. So when you are ready to unhook your vehicle and let your car be a car again, you can go ahead, take your arms out, and as I mentioned, you can leave this in the vehicle, but if someone takes this you're kind of out of luck of hooking up your vehicle again.
So you can just simply take your plug, put this in place, and not only is that going to give it a little bit cleaner look overall, but also it's gonna keep rocks from getting inside of here which could make it difficult to get this back into place. In fact, we had a neighbor here that was while camping they had their arms off, left this open, and they came back to a wasp nest in here. So again, just to kind of protect this from anything getting in here and building up, this is a nice easy way to do it and look good in the process. So with both of them installed, you can see it gives a flat tow setup quite a bit of the cleaner look. And that's what a lot of times your base plates are kind of unsightly.
So not only does it give it a nice cleaner look, a little bit more OEM, but overall just being able to protect those openings is gonna make every time you hook up with your tow bars a lot easier. And that was a look at the Roadmaster base plate plugs..
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
Ratings & Reviews
Even though I ordered the wrong item. The shipping was excellent.
No problem. They work well and stay put.
Great touch to my bracket install! It provides a clean and sleek finished appearance... I'm very pleased with the look!
Great service as always from Etrailer
I originally ordered the wrong size, was able to return and get correct size. They give a very finished look to the installation of roadmaster tow,system
Michael
8/16/2023
The system has worked great, I have pulled my truck over 7500 miles and never had an issue.
The plugs greatly improve the overall appearance of the front end of the vehicle. A lot better than two rusty holes. Also easy to insert and remove.
Very well constructed but was smaller than the hole it that it goes in. I ordered the correct size but had to wrap a strip of duct tape around it to keep it in place. Other than that works fine.
I just received this product installed it on my tow bracket and it finishes off the front end. The main reason I bought it was to keep water and dirt from collecting inside tube. I was surprised how fast I received it. shipping was fast
Great product! I had no idea Roadmaster made these and had been looking for something to plug those holes for months. These are naturally a perfect fit and really tidy up the front of our Fiat500 toad. Best price at etrailer.com.
Covers fit as advertised with no modification necessary. Cleans up the look of the baseplate when not towing.
Fast shipping from etrailer.
Yes, these plugs keep my baseplate receptacles from rusting and give my CMax dinghy a better appearance.
These receiver covers really help keep my receiver holes clean on my Honda Fit.
Fits perfect in my 2017 Crosstrek base plate. Gives a nice finished look when not towing the car.
Dresses up the base plate very well. Service was fast and accurate.
I was looking for something to protect the vehicle mounts when not towing and these work great.
Delivery was quicker than I expected.
Very happy with them.
I was looking for something to protect the vehicle mounts when not towing and these work great.
Delivery was quicker than I expected.
Very happy with them.
Really helps make an EZ plate installation look clean.
Worked as advertised, fit was perfect. Good quality! Shipped and received as promised.
Roy
8/22/2023
Still working well...no issues. Very happy with product.
This was a replacement purchase and it fit perfectly.
These do just what they claim to the retail price seems ridiculous, but I see they're now available for a more reasonable price.
Easy to install, works and looks good. Recieved it in a timely mannerand in good condition.
Results in nice finished look.
Works perfectly.
Perfect fit
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
6/5/2025
Oh no! Were you able to find what you were needing, Eddie? If not, let me know and I can help out :)