Is a Master Key Needed to Install or Remove a Thule Lock Cylinder

Question

Question:

Do I need a master key to install this lock in my crossbar feet? I have the regular keys that came with my cargo box already.

asked by: Sran

1

Helpful Expert Reply:

Yes, you will need the Thule universal change key, # 853-1251, to remove and install new lock cores. the change key pulls down all the tumblers so the lock can be removed or inserted. The existing lock, if present, will have to be unlocked for the change key to work.

expert reply by: Michael H

1

Answer 1

Hey Nelson, welcome back and congrats on your new SUV! We get our information directly from Curt and their item #C13409 and item #C47HR hitches fit all models of the 2025 Subaru Forester including the hybrids. This is why we don't list a hybrid…

view full answer...

Answer 2

Hello Steve, thanks for reaching out. The hitches we offer for the 2025 Subaru Forester like the etrailer #e83ZR do not require deactivation of the handsfree liftgate sensor. The hitch receiver does sit near the sensor, but the sensor should still…

view full answer...

Answer 3

Hey Ronan, I checked with Curt and their hitch part #C47HR should not be used with a vertical bike rack like you noted so that is a correct requirement. It can be used with platform 4-bike racks like the Thule T2 Pro XTR part #TH69TX as they do not…

view full answer...

Answer 4

Best is somewhat objective when it comes to the pair of Curt trailer hitches on your 2024 Subaru Forester as it can be different depending on your application, so I'll go over some differences to help you make an informed decision. - Best Ground…

view full answer...

Answer 5

Hey Jeff! The Curt #C13409 will not completely block the kick sensor on your 2025 Subaru Forester Limited. However, I would expect to have to place your foot on either side of the receiver to activate it. The same is true for any hitch you choose to…

view full answer...

Answer 6

Thank you for the information! It sounds like your 2020 Toyota 4Runner TRD Pro has the raised rails and OEM crossbar setup that we'd find on the standard 2020 Toyota 4Runner. This has very low clearance under the factory crossbars so it's…

view full answer...

Answer 7

According to Thule you can use the QM3 mounting hardware, #TH04997, for the Weekender cargo box. The crossbars on your 1998 Toyota 4Runner will need to be up to 3-5/8 inches wide. I have included a picture that shows how this hardware will install.

view full answer...

Answer 8

For your 2017 Volkswagen Tiguan with the raised factory side rails, I recommend using the Thule WingBar System which is composed of part #TH711200 for the crossbars and part #TH710401 for the mounting feet. As you requested, this system contains…

view full answer...

Answer 9

The Replacement Adapter and Seat #8880637 is designed for Yakima JetStream bars but we do have a review showing them being used with Thule WingBars so it does look like they will physically fit together. With that being said, I recommend sticking…

view full answer...

Answer 10

I recommend installing the Thule WingBar Evo system on your 2022 Toyota RAV4. For the flush rails you'll need the following: 47" WingBar Evo Crossbars - Black #TH711220 or Silver #TH711200 Rapid Podium Feet - #TH460R Fit Kit - #TH78RE…

view full answer...

Answer 11

I do have an option for you but almost all roof rack manufactures unanimously do not advise on opening a sun roof with a roof rack installed due to both the chance of interference and wind noise while open. If you switch to the style which sits on…

view full answer...

Answer 12

The Thule keys and locks that are N2820 and 2820 both use the same replacement key part #THKEYN2820.

view full answer...

Is a Master Key Needed to Install or Remove a Thule Lock Cylinder

Product Page this Question was Asked From

Continue Researching