How to Remove Factory Class II Hitch from 2014 Mercedes-Benz GLK-250 to Install Class III Hitch

Updated 05/19/2015 | Published 05/17/2015

Question:

Hi - I have a 2014 Glk 250 and need to switch out the factory installed class 2 hitch to a class 3 hitch 1.5inch to 2inch receiver. Any advice on removing the the class 2?

asked by: Jeff B

Expert Reply:

We do offer a 2-inch Class III hitch for your 2014 Mercedes-Benz GLK-250, Curt part # C13155 that you referenced.

Your existing 1-1/4-inch Class II hitch, if it was indeed factory-installed rather than dealer-installed, could have been welded or riveted in place. If it was dealer-installed it is more likely that it was a bolt-on item like the Class III Curt hitch. Take a look at the attachment points to see the method of installation.

If riveted or welded in place you'll need to find a technician who can remove it. If its bolted in place you should not have major issues removing it; you will just need to temporarily lower the exhaust (as you will when you install the Curt # C13155) for better access to the mounting points.

Written instructions for the Curt hitch are included for you.

expert reply by: Adam R