What Does CURT Front Mount Hitch Receiver # C31047 Look Like Mounted on 2007 Jeep Grand Cherokee

Question

Question:

I was wondering what the Curtis front hitch looked like mounted on the 2007 grand Cherokee if it comes out just below the radiator or all the way below the air dam

asked by: Bryan R

0

Expert Reply:

I have attached a picture of the CURT Front Mount Trailer Hitch Receiver, # C31047, installed on a Jeep Grand Cherokee. The hitch does not install all the way below the air dam. The air dam will actually be removed and then reinstalled after hitch installation.

I have attached the installation instructions for you as well.

expert reply by: Leah S

0

click to enlarge

Answer 1

The Curt Front Mount Trailer Hitch Receiver #C31047 is currently the only front receiver we carry for your 2009 Jeep Grand Cherokee. This receiver is rated for a tongue weight of up to 300lbs which should be more than enough for your fishing rods and…

view full answer...

Answer 2

For your 2010 Chevrolet Silverado 3500, I recommend the Draw-Tite Front Mount Trailer Hitch Receiver #65050. You will not need to remove the stock front tow hooks for this receiver to be installed. You can see from the video that they are still in…

view full answer...

Answer 3

The only front mount hitch for the 2008 Jeep Grand Cherokee is Curt Front Mount Trailer Hitch Receiver - Custom Fit part #C31047 which is designed to sit below the bumper. We currently do not have a front mount hitch for the Jeep Grand Cherokee that…

view full answer...

Answer 4

Once installed, the Curt front mount trailer hitch, #C31047, will have the receiver under the air dam/front fascia. I have included a link to the installation details that have several pictures that will show you what the hitch will look like once…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

What Does CURT Front Mount Hitch Receiver # C31047 Look Like Mounted on 2007 Jeep Grand Cherokee

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching