Troubleshooting 2012 Ford F-250 with No Trailer Running Lights, Fuse Good
Updated 05/26/2022 | Published 04/30/2015 >
Question:
Have a 2012 F250. I have no running lights to the plug for the trailer. All other lights work fine. Go to the fuse box under the hood and the fuse is fine checked with Multi Meter. Checked the prongs in the fuse box and it does not appear that I am getting power to the fuse. There is also a relay for the trailer running lights in the same box, however I do not know how to check to see if this relay is good or bad. Also, would the power go to the relay then the fuse or the fuse then the relay? Thanks for any help.
asked by: Pat T
Expert Reply:
The easiest way to test a relay is to substitute it with a known working relay and then see if the circuit then starts to work. I would almost guarantee this is your problem based on what you described.
Most likely the power would go to the relays and then to the fuses since the relays are what power the circuit and the fuse is what protects the circuit. A relay can go out without blowing a fuse though in case you were wondering if your fuse being good was an indicator of the relay still being good.
Since you said the fuse is good but there is no power to the circuit that would seem like a dead giveaway that the relay is at fault.

David
8/5/2020
My 2012 f250 has no power on the control side of the relay for the trailer running lights. I have a good ground all fuses intact. I'm thinking body controller fault to the relay.

Continue Researching
- Search Results: castle nut
- Search Results: axle castle nuts
- Shop: Lippert Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5.2K to 7K
- Shop: #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Spindle Nut for Axles with 7/8" - 14 Castle Nut
- Search Results: trailer hubs and drums
- Video: Breaking Down the Kodiak Trailer Hub for 3,500-lb Axles
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Video: In-Depth Review of the CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles
- Shop: Kenda Karrier KR35 ST185/80R13 LRC Radial Trailer Tire w/ 13" Aluminum AM03 Wheel - 5 on 4-1/2
- Shop: Kenda Karrier KR53 ST175/80R13 LRC Radial Trailer Tire w/ 13" White AM08 Wheel - 5 on 4-1/2
- Q&A: Do the Hubs or Axle on the CE Smith Multi Sport Boat and Kayak Trailer Come w/ Grease Zerks?
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Do Trailer Tires Need To Be Balanced?
- Q&A: Compatibility of Grease on CE Smith Trailer Hub Assembly
- Q&A: Do Trailer Wheel and Tires Need to be Balanced
- Q&A: How to Add Grease to Super Lube Trailer Hub with Rear Grease Zerk Fitting
- Q&A: How to Determine What Replacement Hub and Drum Assembly with a 5 on 4-1/2 Bolt Pattern
- Search Results: trailer brakes
- Video: Review of the Grease Cap Plug for E-Z Lube Grease Caps
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer wiring
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
Danny G.
3/11/2020
on my 2012 f250 my running lights dose not work but my break lights and blinkers do work where is the fuse for that