Do the Hubs or Axle on the CE Smith Multi Sport Boat and Kayak Trailer Come w/ Grease Zerks?
Updated 01/27/2026 | Published 01/01/2026
Products Featured in This Question
Question:
The Ce Smith CE48810 trailer pictures appear to show a zerk fitting on the side of the Hub on the inside side of the trailer. Are there such fittings on the hubs of this trailer?
asked by: Kevin
Expert Reply:
Hey Kevin. The CE Smith Multi Sport Boat and Kayak Trailer w/ Bunks item # CE48810 does not have grease zerks on the hubs or axle.
You can replace the stock grease caps with the etrailer Bearing Protectors w/ Covers for 1.98" Hub Bore item # e99005. These are great for easy maintenance and work especially well in marine conditions.
If you have any additional questions, go ahead and click on the box that says Reply to Jerred H and I'll be happy to answer them.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
etrailer Bearing Protectors w/ Covers for 1.98" Hub Bore - Chrome - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.99 Inch
- 2000 lbs Axle
- 2200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Is it Ok to Extend the Bunks Out 6" On the CE Smith Multi Sport Boat Trailer?
- Q&A: What Kind of Bearing Grease is used on the CE Smith Multi Sport Boat and Kayak Trailer?
- Q&A: Recommended Bearing Protectors for a Boat Trailer w/a 1.98" Inner Hub Diameter
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Shop: CE Smith Multi Sport Boat and Kayak Trailer w/ Bunks - 8" Wheels - 12' Boat - 800 lbs
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Q&A: Spare Wheel/Tire Combo Recommendation for CE Smith Boat/PWC Trailer # CE48810
- Shop: Parkit360 Force Electric Trailer Dolly - 2" and 2-5/16" Hitch Balls - 5,000 lbs
- Shop: Parkit360 Force Electric Trailer Dolly - 2" and 2-5/16" Hitch Balls - 10,000 lbs
- Q&A: Availability Of 2" Long 1/2" Wheel Stud With 0.56" Spline
- Article: Most Popular Wheel Bearings
- Q&A: Would 7-Way Trailer Wiring Circuit Have Amperage Rating for Powering 13 amp Horn
- Q&A: Does TecNiq Round Side Marker Light TN54TR Come with Grommet
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Where to Position the Trailer Axle?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
Jerred H.
1/27/2026
Hey Kevin, how did the bearing protectors work out on your CE Smith trailer? Those should make keeping the hubs greased a lot easier. Your update could make it easier for the next person with the same setup.