Ready for the road, this pre-mounted tire and wheel combo handles your gear with confidence. Aluminum wheel resists corrosion, and the low-profile tire helps boost fuel efficiency.
This combo comes pre-mounted and aired up, so it's ready to install right out of the box. Whether you're replacing a worn-out setup or prepping a new trailer, you'll save time and skip the hassle of separate mounting and inflation.
With a Load Range C rating, this tire offers strong hauling capacity for gear, tools, or recreational equipment. A great choice for steady performance without upsizing your setup.
This popular bolt pattern works with many common utility, cargo, and boat trailers. It's a reliable match for most small to mid-size trailers, so you can tow with confidence knowing it fits right.
The KR53 tread is engineered to help channel water away from the contact patch, improving grip and stability on wet pavement. Whether you're towing through rain or shine, it keeps your trailer tracking with confidence.
Radial construction helps reduce heat buildup and extend tread life. The included aluminum wheel features a corrosion-resistant white machined finish that stands up to weather, grime, and road wear.
If the tire fails under normal use in the first year, it gets replaced - simple as that. It's just one more way Kenda's helping you tow with confidence, mile after mile.
If the tire fails under normal use in the first year, Kenda will replace it. That's confidence you can count on, whether you're heading to the jobsite or the campsite.
Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are (also called bolt holes)
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug) 
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug) 
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer. Let's take a quick look together at this Kenda Karrier KR53ST 17580R13 load range C radial trailer tire with this 13 inch white AM08 aluminum wheel. Now, this is a complete trailer tire and wheel combo and so what this means for you is you're not gonna have to worry about mounting a tire on a wheel when you get this. There's not gonna be an extra hassle with this. It's gonna be ready to install right out of the box. Now, as I mentioned, and as we have stamped on our tire, this is an ST175/80R13 radial trailer tire.
So, this is a very common size for utility trailers, boat trailers, and small campers. And it's paired with this really sharp 13 inch white machined aluminum wheel that has a five on four and a half bolt pattern, which is one of the most common bolt patterns on trailers. Going back to the tire here, the tread is a KR53 design. Hopefully you can see that there. And so, this is built for all season use.
It has channels that help move water away from the tire, giving you better traction and control in those wet conditions, something that's especially important when towing. Now this tire is a load range C, which means it has a six ply rating. This can support 1,360 pounds at 50 PSI. So, that's gonna give you dependable capacity for typical hauling needs. The wheel itself is actually rated even higher, at 1,740 pounds, but you are limited by the tire, which is at a lower rating, so that's normal.
The tire also has a speed rating of N, which indicates a maximum speed of 87 miles per hour. The section width of our tire is 6.7 inches. The overall tire diameter when fully inflated is gonna be about 23.8 inches. The size of our wheel, looking at the diameter measuring beat seat to beat seat, is 13 inches. The width, again, measuring beat seat to beat seat is four and a half inches.
The wheel bolt size is a half an inch by 20. This does not come with the center cap, but if you decide to pick one up, you just wanna make sure that it fits the pilot diameter of 3.19 inches. Now, if you happen to have any other questions, whether it's about this sharp looking tire and wheel assembly or anything else that we have here at etrailer, don't hesitate to reach out. We do wanna make sure that you're getting exactly what you need. Well, again, my name is Andy. Thank you for joining me.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.