Filling Hub With Grease That Has a Grease Zerk Outside The Hub
Published 05/27/2022
Products Featured in This Question
Question:
I have a Lumina pull behind motorcycle trailer with torsion axles, I have repacked the bearings but am unsure of how much grease to put in the hub. The hub has a zerk fitting on the side wall, do I fill with grease until it starts coming out of the front bearing or is that overpacking?
asked by: Patrick
Expert Reply:
On a hub like the CE Smith Trailer Hub Assembly # CE13511 with a grease zerk on the hub you will remove the grease cap. You will then use your Grease Gun # L30416 to fill the hub with Grease # L11390 until you see it filling the entire hub and covering the spindle nut. Be sure to also watch the grease seal on the back of the hub to ensure that grease does not push through the grease seal.
If you see grease pushing past the seal before it reaches the spindle nut you will have a damaged grease seal or something inside the hub restricting grease from going through the outer bearing.
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: ce13511
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Q&A: Replacement Bearing Set for Freedom Axle 45264 3500 lb Idler Hub
- Search Results: boat trailer wheel hub kit
- Video: All You Need to Know About the DeeMaxx 10" Hub/Rotor Assembly
- Search Results: hub with integrated rotor
- Search Results: trailer spindles
- Search Results: trailer hubs and drums
- Video: An In-Depth Look at the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub For 2016 ShoreLand'r LUXR2314S7MH Boat Trailer
- Article: VCC Pickup and Dropoff
- Article: How to Measure a Trailer Axle
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Search Results: torsion axle
- Q&A: Does Dexter Hub # 8327812-EB Come Assembled Ready to Bolt On
- Q&A: Replacement Idler Hubs For ShoreLand'r Boat Trailer YAV46TABLW
- Search Results: timken l44649
- Q&A: Replacement Hub For Shorelandr Boat Trailer Using Hub 4470400
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Video: Bearing Buddy Bearing Protectors-BB1980A-SS Spec Review
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Q&A: Replacement Hub For an Older Shorelander Trailer With Inner Bearing 1-3/8 Inch & Outer 1-1/16 Inch
- Video: Hands-On with the Bearing Buddy Bearing Protectors-BB37SR
- Video: Review of the Bearing Buddy Bearing Protectors-BB1980A