How to Determine What Replacement Hub and Drum Assembly with a 5 on 4-1/2 Bolt Pattern
Published 04/23/2015 >
Products Featured in This Question
Question:
If I have a trailer with a 5 X 4.5 bolt pattern can I buy a hub assembly with a 5 X 4.5 pattern and be confident it will fit?
asked by: Bryan L
Expert Reply:
The best way to determine the correct hub and drum assembly for your trailer with a 5 on 4-1/2 inch bolt pattern is to remove the hub from the trailer to get the measurements of your spindle. Or take a look at the inner and outer bearing numbers stamped into the sides of the bearings in order to determine the correct replacement hub for your trailer. Knowing the bolt pattern is a start, but not enough to determine the best replacement hub and drum assembly.
I have included a photo showing the places to measure. Using a tape measure or ruler will not be accurate enough.
The most popular trailer hub and drum assembly is the etrailer E-Z lube # AKHD-545-35-EZ-K and is for 3,500 pound trailer axles and bolt pattern of 5 on 4-1/2. The inner bearing is L68140 and outer bearing is L44649 which are commonly used. It also uses a # 58846 grease seal with an inner diameter of 1.719 inches. I added a video review for you.
I am including links to a FAQ page and a video that will help you when replacing the bearings, races, and seals on your trailer.
If you wish to provide your existing bearing, race and seal part numbers, I can double-check to ensure you are getting the correct bearing kit.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Search Results: trailer wiring
- Search Results: trailer hubs and drums
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Q&A: Replacement Hub and Drum Assemblies for 2002 Escort Boat Trailer
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: etrailer 7 Way Upgrade Kit With Junction Box Installation
- Shop: Lippert Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5.2K to 7K
- Video: Review of etrailer Trailer Wiring - 7 Way Upgrade Kit - e99011
- Q&A: Comparing Dexter and etrailer.com 7,000 Pound Electric Brake Assemblies
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Video: etrailer Electric Trailer Brakes Review
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: Breaking Down the Kodiak Trailer Hub for 3,500-lb Axles
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Q&A: Replacement Parts for 1970s Camper Frame with Dayton Fayette Axles
- Shop: Kenda Karrier KR35 ST185/80R13 LRC Radial Trailer Tire w/ 13" Aluminum AM03 Wheel - 5 on 4-1/2
- Shop: Mounting Hardware for 10" Brake Assemblies
- Search Results: trailer brakes
- Q&A: Do the Hubs or Axle on the CE Smith Multi Sport Boat and Kayak Trailer Come w/ Grease Zerks?
- Q&A: Difference Between EZ Lube Compatible Hubs and Regular Hubs
- Q&A: Filling Hub With Grease That Has a Grease Zerk Outside The Hub
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?





