Will Front Mount Hitch Install The Same On 2004 Dodge Ram 2500 As On 2007 Dodge Ram Truck

Question

Question:

Will the Draw tight #65046 install the same way on my 04 as it does on your video showing an 07?

asked by: Jeff

0

Expert Reply:

The Draw-Tite Front Hitch, part # 65046 would install the same on your 2004 Dodge Ram 2500 as it shows in the attached video for the 2007.

You can check out the attached installation instructions.

expert reply by: Jeffrey L

0

Answer 1

Your perception is correct. The Curt #C31017 would install so that the top of the receiver tube sits about 1.63 inches (about 1-5/8) below the underside of the frame member of the truck. This means that if your truck has the rubber or plastic fascia,…

view full answer...

Answer 2

The best option for a front-mounted trailer hitch that fits your 2009 Dodge Ram 2500 is absolutely the Draw-Tite Front Mount Trailer Hitch Receiver #65046. The biggest reason being the capacity you mentioned, as this is the only front-mount hitch for…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 5

Hey Randy thanks for the information! Here are the parts you'll need to add a brake controller to your 2006 Dodge Ram 1500 with a factory 4-Way connector: Brake Controller and Custom Fit Wiring Harness - Curt TriFlex NEXT item #C43GV 7-Way…

view full answer...

Answer 6

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 7

Hey David, we have everything we need to flat tow your 2006 Dodge Ram 1500 4WD but the first thing you need is a base plate kit like the Blue Ox part #BX1988 which I like because in my experience the Blue Ox kits are just really well made and easier…

view full answer...

Answer 8

If your 2006 Dodge Ram 2500 already has the B&W Underbed Kit #BWGNRK1308-5W installed, then the B&W Companion #BWRVK3400-5W is definitely the best option for towing a fifth-wheel trailer. The Companions are considered by many to be the best…

view full answer...

Answer 9

On the 2006 Dodge Ram 1500 that came with either a factory 4-Way or 7-Way trailer connector the receptacle to plug in a brake controller with a harness such as #3020-P will either be on top of or along the side of a white rectangular box back along…

view full answer...

Answer 10

Unfortunately Jensen keeps discontinuing their stereos so at this time I don't have a good replacement for the VM9726BT. The only stereos we currently have wouldn't be touchscreen or have the compatibility with a camera system if you have one…

view full answer...

Answer 11

I recommend using the Curt Trailer Hitch Receiver #C15809 for your 2006 Dodge Ram 3500. This is a Class V trailer hitch with a 2-1/2" receiver. It has a Gross Towing Weight (GTW) rating of 20,000 lbs and a Tongue Weight (TW) rating of 2,700 lbs.…

view full answer...

Answer 12

Using a fifth wheel adapter like the Andersen Ultimate Connection, part #AM3200, will give you an additional 5 inches offset in the bed of your 2006 Dodge Ram 2500. Since there are no adapters that can be used with a Sidewinder pin box, I am afraid…

view full answer...

Will Front Mount Hitch Install The Same On 2004 Dodge Ram 2500 As On 2007 Dodge Ram Truck

Featured Help Information

Miscellaneous Media

Continue Researching