What is the Heaviest Cushioned Ball Mounts We Currently Offer

Question

Question:

What is the heaviest cushioned receiver hitch you have? Towing and tongue weight

asked by: Jim

0

Expert Reply:

The heaviest cushioned ball mounts we currently offer are 18,000 pounds gross towing weight. The tongue weight is 2,000 pounds.

They are the Convert-A-Ball # AMSCV-6, # AMSCV-2 and # AMSCV-4. The most popular of the 3 we currently offer is part # AMSCV-6. It has a 4-3/4 rise and 6-inch drop.

I included an FAQ and video reviews for you as well.

expert reply by: Chris B

0

Answer 1

Hey Vernon, The best way to reduce tongue weight if you have to much is using a weight distribution system like #C95MJ. This system is going to evenly distribute the weight between the trailer and the towing vehicle taking stress off of the rear axle…

view full answer...

Answer 2

This is a really great question! So ideally you have the trailer sitting as level as possible when you are towing. So that means that if your vehicle suspension is going to sag with the tongue weight of your trailer on the ball mount you'd want…

view full answer...

Answer 3

To determine rise or drop ball mount you'd need, you'll need to make a simple calculation. Measure the distance from the inside top edge of the receiver tube down to the ground, it sounds like you've already done that and came up with 20…

view full answer...

Answer 4

Hey Randy! The etrailer Anti-Rattle Hitch Collar item #e38FV does not come in 2-1/2" but I can still make your F-350 happy. A comparable option for a 2-1/2" receiver is the B&W Anti-Rattle Clamp item #BW65FR. This also connects to the…

view full answer...

Answer 5

Hey Greg, thanks for reaching out! We have the Curt Ball Mount for 2" Hitches #D-28 which is 14-1/4" long and features a 6" drop, but the max weight rating is 6K which might be a bit under what you're wanting. I've got some…

view full answer...

Answer 6

Hey Dewain, we actually have a lock set specifically designed for use with the Bulletproof adjustable ball mount part #BPH77MR with the part #34061674-D. This comes with two locks for the platform of the ball mount and an additional lock for the…

view full answer...

Answer 7

To help alleviate the back and forth chucking you are experiencing with your 2 inch receiver there are a couple of things I recommend doing. First is to use a cushioned ball mount, the Convert-A-Ball, which is designed to reduce this type of movement…

view full answer...

Answer 8

Yes, the #AMSC6HD could be used with a hitch reducer sleeve like you mentioned but since these types of adapters can cause a bit of movement your best option would be the version of this ball mount that is designed to fit 2-1/2 inch hitches directly…

view full answer...

Answer 9

The Dexter Electric Brake Kit #23-450-451 are the brakes you will need for your 2018 Big Tex 22GN with the 10,000lb Dexter axles. These are sold per axle so you will need 2 sets to replace all 4 of your brake assemblies. They are also sold…

view full answer...

Answer 10

Hey Ludwig, Depending on your lug nut type, wheel size, and wheel material it changes what the torque specs are. Since I am not sure what came on the trailer or what size lug nuts you have based on the trailer I have attached a chart that gives the…

view full answer...

Answer 11

The Replacement Heavy Duty Snap-Up Bracket #58392 does not require drilling to install as it basically can set on frame members that are up to 2-1/4 inches in width and uses a set screw to secure instead.

view full answer...

Answer 12

Sounds like you are looking for a lower profile jack for your trailer so that the tailgate of the vehicle does not interfere with it. I went to our warehouse and was able to locate an a-frame jack that measured less than 12 inches from the bracket…

view full answer...

What is the Heaviest Cushioned Ball Mounts We Currently Offer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching