Grease to Oil Bath Trailer Hub Conversion Kit for 3500 Pound Axles
Updated 08/10/2020 | Published 01/14/2015
Products Featured in This Question
Question:
Im looking for the kit referenced in an expert reply by: Jameson C If you had a 3,500 lb axle we sell a kit that would easily convert your hubs to oil bath hubs.
asked by: Doug S
Helpful Expert Reply:
The kit in question is # XLPROLUBE1980KIT. It fits 1.98 inch hubs (the opening where the grease cap fits in the hub) and 3500 pound axles. The seal which will replace the regular grease seal fits 1.72 inch spindles (diameter where the seal rides on the spindle) but will not fit 1.68 inch spindles.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Kodiak XL ProLube Kit for 3500-lb Axles
- Search Results: hub cap
- Search Results: grease cap
- Video: Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans Review
- Q&A: How to Know When Trailer Brake Magnets are Worn Out and Need Replacing
- Q&A: How to Switch From Grease Hubs to Oil Bath Hubs on 3500-lbs Axle
- Shop: Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans
- Shop: Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans - Canada Approved
- Shop: Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke
- Q&A: Replacement Motor for Dexter Ventline 1.2 Amp Bathroom Fan Motor Model V2094
- Q&A: Replacement Motor and Diagram for Ventline Vanair Trailer Roof Vent
- Search Results: cotter pin
- Shop: Replacement Breakaway Switch for Bright Way Trailer Breakaway Kits
- Search Results: dexter trailer breakaway kit
- Search Results: trailer breakaway kit
- Search Results: trailer breakaway
- Search Results: 008~247~05
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Q&A: Does Atwood Still Make 6 Gallon Water Heaters For RVs?
- Video: Kodiak XL ProLube Kit for 3500-lb Axles Feature Review
- Q&A: Can 3,500 lb Grease Hubs be Converted to Oil Bath
- Q&A: Availability of Dexter Axle Brake Assemblies K23-026-00 and K23-027-00
Matthew B.
7/31/2020
Anyone know where I can purchase just the cap? After two winters, I have two of them that the threads have broken from the cap and I've lost all my oil. Due to the thread seeming to be not standard to anything, I'm trying to keep from paying $150 just for 4 caps. Thank you!