How Do I Determine Which Replacement Bearings I Need For a Trailer
Updated 01/12/2015 | Published 01/11/2015
Products Featured in This Question
Question:
how do i know what bearing i need, if all i can find is part #s i need inner measurements of 1 1/16 . and 5/8 inch per hub.
asked by: James
Helpful Expert Reply:
Based on your inner diameter of 1-1/16 (1.063 inches) the replacement trailer hub bearings you need are # L44649. The matching race is # L44610. I highly recommend measuring the bearings and seals with a digital caliper tool to the thousandth of an inch. You would need to remove your hub to obtain. See the diagram to the right.
I have included a FAQ and video review for you too.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Search Results: spindle castle nut
- Shop: Replacement Mounting Stud for Dexter 5 on 4-1/2 Hub and Drum for Hydraulic Brakes
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Q&A: Does Trailer Hub 84545UC1-EZ Come Assembled and Greased
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Video: Hands-On with the Kodiak Trailer Hub for 3,500-lb Axles
- Search Results: akihub~545~35~g~ez~k
- Search Results: castle nut
- Search Results: ptw83020
- Search Results: lucas marine grease
- Search Results: akihub~555~35~ez~k
- Shop: Spindle Nut Kit for EZ Lube Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: yates
- Q&A: Lug Nut Torque Range for 1/2-Inch Wheel Studs and Steel Trailer Wheels
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Q&A: Torque Specs for U-Bolts on 3,500 Pound Axles
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Tire Sizing
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs