Clevis Draw Bar Recommendation to fit a 2-1/2 inch Hitch

Question

Question:

DO you have the AMCC2HD it has a 2 1/2inch shank or know anything about a larger sized AMCC2

asked by: Travis

1

Helpful Expert Reply:

I have a solution for you, but the part number AMCC2HD has been discontinued so your best option would be to get the # AMCC2 that you referenced and then use the Curt adapter part # C45405 to adapt it to fit a 2-1/2 inch hitch.

expert reply by: Jameson C

1

Answer 1

The Conver-A-Ball clevis hitch, part #AMCC2, has a maxium tongue weight rating of 2,000 pounds. This hitch has a polyurethane interior that works like a shock absorber to reduce the vibration caused by towing. I've linked a video that…

view full answer...

Answer 2

I wasn't sure exactly what dimension of the Convert-A-Ball Cushioned Ball Mount/Clevis/Pintle #AMCC2 you were looking for so I went out into our warehouse and measured it in several places and attached a picture of it to show these measurements.

view full answer...

Answer 3

I do have something similar to the Convert-A-Ball Cushioned Ball Mount/Clevis/Pintle #AMCC2 designed for a 2-1/2" hitch, but this is currently only offered in 2". With that said, the Shocker XR Adjustable Clevis Mount #SHK85ZR is designed…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Clevis Draw Bar Recommendation to fit a 2-1/2 inch Hitch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching