bing tracking image
  1. Trailer Suspension Parts
  2. RV Ride Control
  3. Alignment and Lift Kits
  4. Boat Trailer
  5. Camper
  6. Car Hauler
  7. Snowmobile Trailer
  8. Utility Trailer
Correct Track Trailer Alignment and Lift Kit - Tandem Axle
RV Ride Control

Correct Track Trailer Alignment and Lift Kit - Tandem Axle

Part Number: RR23QX
In Stock
$456.06
Trailer Suspension Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Prevent uneven wear on your RV tires and get a smoother, more stable ride by properly aligning your trailer's axles with this kit. This kit also lets you raise your trailer or RV so you can tow with a tall or lifted truck. No-drill installation. Great Prices for the best trailer suspension parts from RV Ride Control. Correct Track Trailer Alignment and Lift Kit - Tandem Axle part number RR23QX can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (30)
  • Q & A (0)
  • Photos

RV Ride Control Trailer Suspension Parts - RR23QX

  • Alignment and Lift Kits
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snowmobile Trailer
  • Utility Trailer
  • Slipper Springs - 2 Inch
  • Tandem Axle
  • RV Ride Control

Prevent uneven wear on your RV tires and get a smoother, more stable ride by properly aligning your trailer's axles with this kit. This kit also lets you raise your trailer or RV so you can tow with a tall or lifted truck. No-drill installation.


Features:

  • Corrects misaligned axles and lifts trailer for level towing
    • Improves the life of your tires and creates a more stable ride
    • Provides extra clearance so you can tow with your tall or lifted vehicle
  • Lets you move axle up to 1/2" forward or 1/2" rearward for proper alignment
    • Adjusts in 1/4" increments
  • Raises trailer height by 1-1/4" or 2-1/4"
  • Works with your existing leaf spring suspension system
    • Brackets attach to hangers and supply new, lower mounting point for springs, which results in a taller ride height
    • Alignment correction plates mount on either side of hangers to shift axle placement
  • Includes 8 suspension plates, 8 alignment correction plates, and the hardware needed for installation
    • No drilling required
  • Made in the USA


Specs:

  • Application: tandem-axle trailers and RVs with leaf spring suspensions
    • Minimum required distance from I-beam to spring mounting hole on hanger: 2-5/8"
    • Works with 3" wide x 3-3/4" tall hangers or 3" wide x 5" tall hangers and leaf springs up to 2" wide
  • 90-Day warranty


Note: This does not work with MORryde CRE3000 equalizers.


Raise Your Trailer's Ride Height

Newer trucks are being built to ride higher. This means that your trailer may have to be raised to match. If the two aren't the same height at the connection point, the nose of your trailer or RV is going to ride too high. This will put too much weight on the rear of your trailer, which can result in poor handling and may eventually cause damage.


The Correct Track helps to solve this problem by lifting your trailer or RV 1-1/4" or 2-1/4", which provides a level towing setup for taller trucks. This added lift is also great for 5th-wheel trailers that might have trouble clearing tall pickup bed side rails.


Correct Misaligned Axles and Suspension

If the tires on your RV or trailer are wearing down quickly and prematurely, there's a good chance your axles are out of alignment. Driving with misaligned axles for long periods of time will shorten the life of your tires, reduce your gas mileage, and can make it difficult to steer your rig. Misaligned axles are often caused by an imbalance of weight, which can result from simply using the slide-out on your 5th wheel or having heavy appliances positioned on one side.


The Correct Track integrates into your trailer's suspension system and shifts the axles back into proper alignment. This kit allows you to adjust the axle alignment by 1/4" increments for a properly aligned suspension. It will correct your RV or trailer's alignment whether the axles need to be moved forward or backward.



9005934 Correct Track Trailer Alignment and 1-1/4" or 2-1/4" Lift Kit - Dual Axle

Installation Details RR23QX Installation instructions



Customer Satisfaction Score:


Customer Reviews

Correct Track Trailer Alignment and Lift Kit - Tandem Axle - RR23QX

Average Customer Rating:  4.4 out of 5 stars   (30 Customer Reviews)

Prevent uneven wear on your RV tires and get a smoother, more stable ride by properly aligning your trailer's axles with this kit. This kit also lets you raise your trailer or RV so you can tow with a tall or lifted truck. No-drill installation.

by:

It CAN work with the Moryde CRE3000 suspension! For obvious reasons etrailer cannot and will not advise on making any modifications to this product and in doing so you are likely forfeiting any chance at returns or exchanges. I spent plenty of time researching best I could before pulling the trigger on this because I didn’t want to replace my perfectly good Moryde CRE3000 stabilizer unless I absolutely had to or the modifications would be too much work than it was worth. I’ll include as much information as I can.

Install of the product itself was super easy! Just unbolt the springs, attach correct track brackets and slip the springs right back in!

When it came to installing the equalizer shackle braces, modification IS REQUIRED! (Refer to photos). This requires an angle grinder for you to trim off a short section of the curled edges in order to clear the body of the CRE3000 stabilizer, while still maintaining some sort of edge to the plate to hold the adjustment block square, and cut the corners off of the adjustment plates to clear the tabs on the CRE3000.

I had wet bolts installed and the correct track kit will not host the wet bolts due to added plates needing longer bolts. I opted to replace only the 6 bolts I needed (part no. MR52HR), however they do make full wet bolt kits to work with the correct track (you would need the # MR58ZR for 2-1/4" and # MR98ZR for 3-1/8".)

I got everything installed and when it came time to check for axle alignment I found my axles were already perfectly square with towing direction of kingpin, and parallel with each other.

I can’t thank the customer service members of etrailer enough for putting up with a lot of my questions on other postings and helping me get as much info as I could. As they mentioned to me and it bears repeating, if you decide to modify this kit in any way, that’s a “you” decision and they can’t advise on that.

Trailer info: 19’ Dutchmen Voltage 3705 toy hauler. Tandem Lippert 7K axles, springs mounted on top of axle, Moryde CRE3000 equalizer with Moryde Suspension upgrade wet bolt kit.



by:

ETrailer is the best, but these things took TIME to figure out and get the axles aligned correctly! They did the job, lifting the RV up from the tires, and no more tires scraping the fender well on rough/bumpy roads. Have 2 people and a weekend available to get the kit installed correctly and aligned. Tires are running great with even wear. Thank you!

Michael

3/27/2024

So, far even with chug holes and some rough interstate pavement, no more tire rubbing on the upper part of my self-made wheel wells. The Lift Kit has worked great!



by:

I have not installed the kit yet. The ordering process was easy and had plenty of information to make sure it was what I needed. The delivery date estimated during the order process was not accurate. The delivery date during the order process stated it to be the end of April. A few days after the date had passed I received a notification saying the order was being gathered and was expected to ship May 1. I received the order on May 6. This is not a huge issue, but with porch pirates these days, I make plans based on the stated date when ordering.
*** That being said, I have always had great great experience with eTrailer and is my go to for specialty and towing items. I am grateful for the detailed answers, videos and feedback they have for their customers. ***



by:

Well unfortunately I was not able to use this product it was not applicable to my trailer but all I know is the service and the help that I got from the people that e trailer was awesome I will not shop anywhere else if I don't need to

Daniel

5/9/2024

This product has helped us tremendously because of where we live. We are in mountainous country my driveway is hard to get into and this lift kit and the shock absorbing equalizer kit has made our trailer awesome. I would recommend it to everyone that has a bumper pull fifth wheel double or triple axle trailer you will love it



by:

It raised my camper to better match the height of my truck. Also, I was able to align the axles for more even tire wear.



by:

Horrible product.. from the beginning I had problems with delivery. they changed the delivery date 3 times. when the product arrived at my house I was not present because I expected to use it before. and when using the product I realized that if it would not work. I took it in for installation and the mechanic tried several ways to find a safe position for it but . when I finished the installation and the weight of the trailer came down, the parts with the holes rotated and that brought me a loss of 2 tires. because they started to rotate crooked! In the end, completely dissatisfied with the product. and in the end I never knew what day I received the product and then I never knew when I would have the opportunity to return the product since I felt harmed by the situation! when calling the store they said my refund window closed 2 days ago! very strange. So far completely unsatisfied

Etrailer Expert

Jenny N.

8/31/2023

It is very unusual for the holes to rotate once this is installed. The manufacturer will be in contact to discuss this with you.



by:

I was having a problem with the brakes on one wheel failing (magnet/actuator), even after replacing the entire brake assembly. Upon measuring the axle alignment to the hitch ball I discovered that the axles were out of alignment. This kit corrected the problem and I am no longer having brake problems, or excessive tire wear. The trailer tracks much better. I am very satisfied with the product. Installation on two axles took about 3-4 hours.

Thomas

5/26/2023

After 2 years and 3300 miles, product is still working as expected. Completely solved the problem of tire wear, and excessive brake heating which lead to brake failure. Very happy with product.



by:

This kit made a huge difference in the height of my 5th wheel, it is now level and also gives my rear leveling jack some extra clearance. Pretty easy to install, the first one will take a little bit of time, but the reat will go faster. I also installed the heavy duty shackles and the Road Armor Equalizers. This all made my RV ride so much better!



by: 06/11/2022

Used this to lift my fifth wheel 2 inches to reduce the nose height condition that is common with newer trucks. Not as easy as changing a tire though.



by:

Price was good and it was in stock.
I
was confused why it took four days to ship when it was pulled the second day?
I ended up not being able to use it before I left on a six-week excursion.
Looking forward to getting back home and installing the product.

Etrailer Expert

Jenny N.

6/12/2023

To be honest it looks like there was a hiccup when the order was sent to the warehouse. We did not have the kit on hand to ship right way and needed to wait til our next shipment came in which was just in a few days.



by:

Installing this kit on my travel trailer corrected my dual axle alignment problem which was wearing the inside of the left rear tire. It was easy to install, easy to understand, and very adjustable.



by:

I can’t review the product since installation is not scheduled until Friday. I have ordered fro eTrailer because I like their service, customer service and quick ship and deliver.



by:

Product is great. I just wish the instructions addressed tandem and triple axle applications. And some actual pictures of installation would be even better.



by:

Do not purchase. These did not work at all and I had to remove them.

Etrailer Expert

Jenny N.

4/11/2023

I am sorry to hear that this kit did not work out for you. I would like to know more about your experience with them and why it had to be removed.



by:

Pretty simple to do with great benefits down the road.



by:

The product looks great and seems very well made. I have not been able to install on my own and I have tried with two different shops to install this system on my RV and they will not.



by:

I have not had a chance to install them yet, but they seem to be exactly what I need.



by:



by:



by:



by:



by:



by:



by:



by:

Built heavy duty ,my axles are in line for once,opted to lift my rig at 2 1/4 " it sits level with my 17 dodge 3500. I like this kit better than the lippert kit. This kit is like it was made for my suspension.


25
30
Show More Reviews

See what our Experts say about this RV Ride Control Trailer Suspension Parts

  • Replacement Suspension Parts & Lift For 2012 Skyline Koala 27CDS With 3,500 lb Axles
    Okay let's get started here with the suspension for your 2012 Skyline Koala 27CDS with 3,500 lb Axles; for the first part regarding your equalizers and suspension upgrade kit, so long as your current equalizer is spaced 6 inches (or close to it - I am unable to tell from your parts list if the drawing of the equalizers are your measurements or referencing something else) apart from bolt hole to bolt hole you can use the Road Armor Shock Absorbing Equalizer Kit # LC696740 with the MORryde...
    view full answer...
    Image 1 for Image 2 for
  • Are Hanger Spacers Needed for 3rd Generation Correct Track on Tandem Axle Trailer
    I definitely see what you're saying about the spacer, found as part # LC34UD, from the 2nd gen Correct Track LC407131. With that being said, the Correct Track Trailer Alignment and Lift Kit # RR23QX has been safety tested and works just fine without that spacer. As long as you install the Correct Track according to the instructions you will be just fine. If you really want those spacers in-between the hangers on your trailer then you can order some from the part above and install them...
    view full answer...
  • Raising Trailer Suspension To Clear Rear Leaf Spring From Hitting The Crossmember
    It appears you may have installed shackle straps which are longer than what you may have had. It appears your straps are either 3-1/8" # TRSL313 or 3-1/2" # TRSL350 and you likely only need a 2-1/4" # TRSL225. This would move the mounting point closer to the axle and raise the trailer approximately 1/2". To get enough height to clear your crossmember you will likely need the Lift Kit # RR23QX. This will allow you to raise the suspension either 1-1/4" or 2-1/4" to clear your rear crossmember. On...
    view full answer...
    Image 1 for Image 2 for
  • Solution for Lift Kit on 5th Wheel With Over-Under Conversion Kit Installed
    Since your axles are already flipped you don't have many options for a lift. Although it is not going to get you 4" you can use the Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX. This will get you an additional 2-1/4" of lift. If you have a triple axle setup you can use the # RR55QX instead. This is a no-drill installation and welding will not be required.
    view full answer...
  • Lift Kit for Trailer with Tandem 5,200 lb Axles
    The easiest way to gain two inches of lift would be with the Correct Track lift kit part # RR23QX which will give it a lift of 2-1/4 inches. Just going with a taller equalizer would not give you the lift you need. This kit does work with double eye springs. To pick out replacement springs I would need to know the length of your current springs. If the spring is 25-1/4 inch long you would want the part # e34SR. Or if 26 inches long part # e94SR.
    view full answer...
  • Troubleshooting Lower Suspension Height On a 371 Fuzion 5TH Wheel Toy Hauler With MORryde CRE3000
    It is normal for the rubber to push out of your MORryde Shock Absorbing Suspension Equalizers # MR27ZR the way it is. The main issue I see is your Shackle Strap # TRSL313 is wearing out. I can see a bit of the hole on the top left strap which means the holes in the strap are being elongated. I recommend replacing these immediately with one of the following kits. MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" # MR46ZR MORryde Suspension Upgrade Kit for Tandem Axle Trailers...
    view full answer...
    Image 1 for
  • Will Nose-High 5th Wheel Trailer Sway During Travel
    Thanks for all of the info and the research you've already done! Dropping almost 2" from about the point where the king pin connects to the Demco Hijacker 18K # DM69GV or 21K # DM89GV back towards the end of the bed is definitely enough to cause your trailer to sway. A level trailer that is properly loaded will give you the best towing performance. To level things out you have a few choices: 1. Move the pin box up to a higher set of bolt holes 2. Install an Over-Under Kit like part #...
    view full answer...
  • Recommended Lift Kit for 2012 Keystone Cougar XLite Fifth Wheel
    We have a solution for you but because your axle is already over slung and you have taller hangers in place, we are limited in options. From the images you forwarded, you have a T44 axle. I recommend the Correct Track Trailer Alignment and Lift Kit for tandem axle, # RR23QX. This raises the trailer height by either 1-1/4" or 2-1/4" working with your existing leaf spring suspension system. The brackets attach to hangers and supply new, lower mounting point for springs, which results in...
    view full answer...
    Image 1 for Image 2 for
  • How to Raise 5th Wheel Trailer Height to Level Trailer with Taller Truck
    This is definitely something that has been an issue for newer trucks like your 2022 Ram 2500. Pretty much every truck manufacturer started making their trucks sit a bit higher a few years ago which has really changed the game for 5th wheel towing. If you adjust the pin box for clearance and you find that you also need to raise the height of your trailer then you can do so with a Correct Track kit or Over-Under Conversion kit. You can get by with your 5th wheel being out of level by maybe...
    view full answer...
  • How to Lift a 2016 Riverside Retro 199FKS Trailer
    There are a couple of options to safely lift your 2016 Riverside Retro 199FKS trailer depending on if your axle's sit above or below the leaf springs. All of them will get you within the 2" - 3" range. If your axles are already below your leaf springs the only option is the Correct Track Trailer Alignment and Lift Kit item # RR23QX. This kit mounts to your spring hangers and moves the attachment point down 1-1/4" or 2-1/4". If your springs are below your axles you will want to use one...
    view full answer...
  • Recommended Trailer Alignment And Lift Kit For A 2014 Jayco Eagle
    The Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX will work with tandem-axle trailers and RVs that have double-eye leaf spring suspension. The brackets in the kit will attach to the hangers and supply new, lower mounting points for springs, which will result in a taller ride height. The lift kit will not work with The MoRryde 3000 Stabilizers # MR34AR because it will not fit inside the raised portion of the equalizer.
    view full answer...
    Image 1 for Image 2 for
  • Can 2" Lift Kit and Roadmaster Comfort Ride Be Installed on a 2022 KZ Durango 5th Wheel
    Yes, you can install both the Correct Track Trailer Alignment and Lift Kit # RR23QX and the Roadmaster Comfort Ride Shock Absorbers # RM-2460 on your 2022 KZ Durango 5th wheel. There are extension plates that you can use or you can connect the shock absorbers directly to the mounting brackets to reach the desired 30 degree angle for the shocks. Attached is a photo showing the angle range of the shock absorbers you'll want to shoot for) between 20 and 40 degrees), as well as a video for...
    view full answer...
    Image 1 for
  • Lift Kit Solution for Trailer with Axles Under Leaf Springs
    What you need is the Correct Track tandem lift kit part # RR23QX which will give your current suspension setup a lift of up to 2-1/4 inches. Aside from that there isn't a way to gain additional height from the trailer.
    view full answer...
  • Lifting Jayco 5TH Wheel Camper With Triangular Shaped Leaf Spring Hangers
    As your outer hangers already have a second set of mounting holes for the leaf springs that will raise your trailer you will only need to concern yourself with the center hanger. If the center hanger is also taller with a second hole that will raise your Jayco trailer. If your center hanger is traditional like the # 115919 you can use just the Correct Track Trailer Alignment and Lift Kit # LC87120 to drop the mounting point for the equalizer so that your suspension stays level from front...
    view full answer...
    Image 1 for Image 2 for
  • Can Correct Track Lift Kit be Used with MORryde CRE3000 Equalizers
    The Correct Track Tandem Lift kit part # RR23QX cannot work with the CRE3000 kit you have on your trailer now due to clearance issues so you would need to replace them with like with the EquaFlex part # LC279688 which is also cushioned.
    view full answer...
  • Dexter EZ Flex Kit that Fits in Place of 6 inch Long Equalizer
    The Dexter E-Z Flex Suspension Kit # K71-652-00 is the kit you want. It's the correct size and capacity for your setup and comes with the upgraded HD shackles and wet bolts as well. This will cushion your trailer suspension well and While we don't have 6 inch tall suspension hangers we do have a lift kit solution with the Correct Track Tandem Lift Kit part # RR23QX which will give you a lift of 2-1/4 inches.
    view full answer...
  • Shorter Rear Jack Legs for Lippert Ground Control System to Help with Ground Clearance
    Lippert actually has 2 inch shorter versions of the rear jacks of the Lippert ground control with the part # LC342610 for the left rear and then # LC428493 for the right hand side. We also have the lift kit part # RR23QX which can give your trailer a lift of 2-1/4 inches as well.
    view full answer...
  • How to Lift a 2020 Montana High County 5th Wheel Trailer
    Congrats on the new truck! There are a couple of options to lift your 2020 Montana High County depending on if your axle's sit above or below the leaf springs. If your axles are already below your leaf springs the only option is the Correct Track Trailer Alignment and Lift Kit item # RR23QX. This kit mounts to your spring hangers and moves the attachment point down 1-1/4" or 2-1/4". This is most likely what you will need. I took a look at your 5th wheel trailer online and it looks like...
    view full answer...
  • Does MORryde CRE3000 Suspension Enhancement Affect Height of Trailer
    The MORryde cushioned suspension equalizers like the CRE3000 part # MR27ZR that you referenced do not affect the height of the trailer at all. If you wanted to lift the trailer you could use the Correct Track lift kit part # RR23QX as well.
    view full answer...
  • Solutions To Add More Clearance For Lippert Ground Control 3.0 Jack Legs
    I don't know what type of brackets were used on your 2022 Heartland RV Torque 5th Wheel but we carry the # LC349975, which can really only be installed at one height since they have lip that butts up against the bottom of the I-Beam. If clearance is the main issue here then another solution would be to raise the height of the trailer to gain a bit more clearance for the jacks. This can be done by replacing the leaf spring hangers with longer ones, using a correct track system # RR23QX,...
    view full answer...
    Image 1 for
  • Lift Kit Compatible With a Keystone Fuzion 5TH Wheel Toy Hauler
    If your Keystone Fuzion 5th wheel toy hauler uses Dexter # 12 Torflex torsion axles then the Lift Kit # K71-725-02 is what you will need to raise the trailer 3-1/8". As most of these types of trailers use double eye leaf springs it is more likely you will need either the Tandem Axle Lift Kit # RR23QX or Triple Axle Lift Kit # RR55QX depending on your number of axles. This will give you either 1-1/4" or 2-1/4" of lift depending on the setting which best levels with your F-450.
    view full answer...
  • Correct Track Trailer Alignment and Lift Kit for Tandem Axle Redwoods 38GK 5th Wheel
    I would be happy to help you find a lift kit for your 2014 Redwoods 38GK 5th Wheel. I recommend the Correct Track Trailer Alignment and Lift Kit - Tandem Axle item # RR23QX. This kit raises your trailer height by 2-1/4" and works with your existing leaf spring suspension system. These brackets attach to your hangers and supply new, lower mounting point for springs, which results in a taller ride height.
    view full answer...
    Image 1 for
  • Are MORryde X-Factor Crossmembers Compatible With Lippert Lift Kit
    If you're talking about the older discontinued Lippert lift kit that is similar to the Correct Track # RR23QX it is not compatible. However, you can use the Correct Track with the #MR33WR if you use the adapter # MR93WR. This lift kit allows you to raise the trailer 1-1/4" or 2-1/4" and aligns the axles.
    view full answer...
  • Lift Kit for 2024 H&H Cargo Trailer
    Assuming those 5k axles have a 3" diameter the best option would be the Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00 you were looking at. This will lift the trailer the diameter of the axle plus the height of the leaf spring stack. The other option would be to use the Correct Track # RR23QX. This raises your trailer by 1-1/4" or 2-1/4" and aligns your axles.
    view full answer...


< Previous
123. . .18



Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Bradley B
Installed by:
Bradley B
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video by:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee John S
Video by:
John S
Employee Mike S
Written by:
Mike S
Employee Michael B
Updated by:
Michael B
Employee Manda E
Updated by:
Manda E

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.