Can Correct Track Lift Kit be Used with MORryde CRE3000 Equalizers
Updated 06/29/2026 | Published 07/11/2023
Products Featured in This Question
Question:
I have a 2022 Grand Design Reflection 150-Series Model 268BH with tandem Dexter axles and MORryde CRE3000 equalizers. I need a suspension lift for tow leveling and for additional clearance with rear feet. This appears to be the correct kit to work with the spring hangers, but in the product description it says this does not work with CRE3000 equalizers. Is there a different kit available that is compatible with the CRE3000, or is this the right kit but requires some modification to fit, or should I /replace the CRE3000? Any guidance you could provide would be much appreciated. Ive attached photos in case they are helpful.
asked by: Kenneth H
Expert Reply:
The Correct Track Tandem Lift kit part # RR23QX cannot work with the CRE3000 kit you have on your trailer now due to clearance issues so you would need to replace them with like with the EquaFlex part # LC145546 which is also cushioned.
Product Page this Question was Asked From
Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- RV Ride Control
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: lippert correct track
- Search Results: spring seats
- Search Results: shackle straps
- Search Results: axle
- Shop: Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs
- Video: Review of RV Ride Control Trailer Suspension Parts - Alignment and Lift Kits - RR23QX
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Video: Review of Dexter Trailer Suspension Parts - 3 Inch Round Trailer U Bolts - SP01-060
- Video: Hands-On with the MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track
- Video: Detailed Breakdown of the Replacement U-Bolt w/Nuts for 8,000-lb, Round Trailer Axles
- Search Results: slide cable
- Q&A: What Trailer Lift Kits Will Work with the MORryde CRE3000 Equalizers
- Search Results: toilet
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Shop: Correct Track Trailer Alignment and Lift Kit - Triple Axle
- Q&A: 2 inch Lift Kit for Jayco 5th Wheel with MORryde CRE3000 Cushioned Equalizers
- Search Results: correct track
- Q&A: Does Correct Track Trailer Alignment Kit # RR23QX Come with Enough Brackets for Tandem Trailer
- Video: Review of Timbren Trailer Suspension Parts - RV Trailer Enhancement Spring Over Axle - T94KV
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 3-1/8" Shackle Straps
- Q&A: Why is the Correct Track Trailer Alignment and Lift Kit Not Compatible with the CRE3000 Equalizers
- Q&A: Install Instructions Link for Correct Track Lift Kit RR23QX
- Q&A: Recommended Trailer Alignment And Lift Kit For A 2014 Jayco Eagle
- Q&A: Does MORryde CRE3000 Suspension Enhancement Affect Height of Trailer
- Shop: MORryde X-Factor Crossmember Adapter Kit for OEM Correct Track Hangers
- Shop: Gooseneck Hitch
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers -3-1/8" Shackle Straps
- Video: Review of MORryde Trailer Suspension Parts - Suspension Kits - MR46ZR
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR56ZR
Gordon K.
6/27/2026
I am confused by the comment that this kit will not work with the CRE3000. It appears that this kit does not include any brackets for the center hanger where the CRE3000 is installed. It only has 8 bracket sets, presumably for the front hanger and the rear hanger and nothing for the center. I understand to get the full 2" of lift you have to add the center bracket hangers (buy single axle kit) but this kit does not include the center hanger brackets and will only lift 1 1/4". So if I only want 1 1/4" lift why won't the CRE3000 work?