Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick

See what our Experts say about this Roadmaster Tow Bar Base Plate

• Does The Rampage Rock Rage Bumper Have Add-On D-Rings And What Is Needed To Flat Tow A 1999 Jeep TJ
  The Rampage Rock Rage Front Bumper for Jeep # RA97801 doesn't have a D-ring add-on option so you'd have to have a qualified fabricator weld D-rings in to the bumper if you wanted them. You'd also need to have that fabricator ensure that the bumper is properly secured enough to the frame to be able to tow from the D-rings. If you end up being able to tow from the D-rings then you'll want either the Roadmaster # RM-035 (3/4" thick D-rings) or RM-035-1 (1" thick D-rings) and a Roadmaster...
  view full answer...
• Can I Use Older Eagle 8000 Tow Bar With A 2016 Jeep Wrangler With Aftermarket Bumper
  Hello Dave. The Roadmaster D-Ring Bumper Mounts will work with the older Eagle 8000 tow bar. We offer D-ring mounts in the following sizes: - 3/4" D-Rings # RM-035 - 1" D-Rings # RM-035-1 Also, please do verify that your aftermarket bumper is rated for flat towing.
  view full answer...
• Is There Tow Bar that Can Attach to D-RIngs on Jeep Wrangler Bumper
  Hey George, you could use the Roadmaster Falcon part # RM-520 with D-rings on your Jeep bumper but you would need a D-ring adapter that is the correct size for what you have. The part # RM-035 would be the correct adapter if it's 3/4 inch d-rings or part # RM-035-1 if they are 1 inch.
  view full answer...
• Parts Needed to Flat Tow 2013 Jeep Wrangler Unlimited with Aftermarket Bumper that Has D-rings
  Flat towing a vehicle such as a Jeep Wrangler behind a Class C motorhome such as the Dynamax Force 37BH HD will require a few items including the tow bar and braking system. The Blue Ox Patriot braking system # BLU37TR that you referenced is a very good selection. I linked overview articles on flat towing that cover each of the items needed. These are a good starting point. But first I suggest you check with the bumper maker to confirm it is rated for towing. Not all aftermarket bumpers...
  view full answer...
  
• What are the Dimensions of Roadmaster Adapter for Jeep D-Ring Bumper Mounts?
  The dimensions of the bumper mount adapters for Jeep Wranglers # RM-035-1 which is 1 inch and # RM-035 which is 3/4 inch is referring to the thickness of the shackle mounts. They have adapter pins which allow them to fit 1 inch and 7/8 inch diameter holes.
  view full answer...
• Can Roadmaster Night Hawk Tow Bar Be Used with D-Rings on Jeep Wrangler
  The Roadmaster Nighthawk All Terrain Tow Bar # RM-676 (excellent choice) will hook up to the D-ring hooks on your Jeep's aftermarket bumper as long as you use the appropriate adapter. If your D-rings are 1 inch thick you will need part # RM-035-1 and if they are 3/4 inch thick you will need # RM-035. These will attach to the D-ring mounts to provide a connection point for the tow bar. I do also recommend verifying that your particular aftermarket bumper is rated for towing. I have attached...
  view full answer...
• Base Plates to Flat Tow a 2017 Jeep Wrangler Unlimited Rubicon Hard Rock with AEV Front Bumper
  I checked with AEV and found that you can use the D-ring mounts on that bumper to flat tow the Jeep. If the D-ring mounts are 3/4 inches thick with 7/8 inch or 1 inch diameter holes you can use # RM-035 with a Roadmaster tow bar. If the D-ring mounts are 1 inch thick with 7/8 inch or 1 inch diameter holes you can use # RM-035-1. The tow bar would have to be an RV mount model such as the Falcon 2 # RM-520. The good news is that if the D-ring mounts are compatible with either of the adapters...
  view full answer...
  
• What Tow Bar and Adapter Will Work With a Fab Fours Grumper Bumper on a 2011 Jeep Wrangler
  In order to find out which towbar and d-ring adapter will work with the Fab Fours Grumper Bumper on your 2011 Jeep Wrangler you will need to take two measurements, the thickness of the d-rings and the diameter of the pin hole. I was not able to locate this information on Fab Fours site which is why you will need to measure this for yourself. If they measure to be 3/4" thick with a either a 7/8" or 1" diameter pin hole then you can use the Adapter for Jeep D-Ring Bumper Mounts part # RM-035...
  view full answer...
• Base Plate for 2014 Jeep Wrangler With 1 D-Ring Bumper Mounts
  We have exactly what you need to flat tow your 2014 Jeep Wrangler with an off-road bumper that has 1" D-ring brackets, the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM-035-1. As the name of the product states, however, they will require a Roadmaster tow bar as there are no adapters to use with a Blue Ox tow bar. For this I highly recommend checking out the Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 because it has long arms...
  view full answer...
• How To Use Tow Bar with D-Rings On Jeep Bumper
  In order to use a tow bar with a set of welded-on d-rings which are commonly found on aftermarket Jeep bumpers you need a specific type of tow bar, one that mounts on the motorhome when not in use. The Roadmaster Falcon 2 Tow Bar part # RM-520 and Blue Ox Alpha 2 Tow Bar part # BX7380 are both examples of motorhome mounted tow bars and are excellent options to use, the best value for the money. In order to use either tow bar with a set of welded-on d-rings you will need an adapter which...
  view full answer...
• D-Ring Kit for Flat Towing a 1998 Jeep TJ with Roadmaster Falcon All-Terrain Tow Bar
  Hey Tim, thanks for all of the info! The Roadmaster Kit # 1427-1 on your buddy's Jeep is for a different model Jeep which is why you're having issues finding that for your 1998 Jeep TJ on our site. The equivalent for your '98 TJ would be the part # 1417-1 but requires you to move your factory fog lights 1" for the kit to fit. Since you're wanting to switch to a D-Ring front bumper you'll need the Adapter Kit # RM-035-1 for 1" D-Rings. Please note you'll need to make sure your bumper is...
  view full answer...
• Help With Roadmaster D-Ring Adapters Having To Much Play
  So there are 2 adapters the 3/4" # RM-035 or the 1" # RM-035-1 for your Roadmaster Falcon All-Terrain Tow Bar # RM-522. If you have the larger 1" wide adapters and only a 3/4" wide D-Ring you would want to get the smaller size. Otherwise you would want to source some washer/spacers locally you can use with the pins and bushings to reduce the play you have. A little play is a good thing as the different metals can expand differently and could make it difficult to connect/disconnect if the...
  view full answer...
• Diameter of Holes for the Demco Replacement Connecting Clevis for the Commander Tow Bar
  The diameter of the holes on the Replacement Connecting Clevis for Demco Commander Tow Bar # DM13582-81 measure 1/2".
  view full answer...
  
• Can D-Ring Bumper Mount Adapters be Used to Tow a Jeep Wrangler with a Stowmaster Tow Bar
  If the D-ring bumper mounts on the Rock Crawler bumper are 3/4 inches then the Roadmaster adapters, part # RM-035, will work on the bumper. If the mounts are 1 inch then instead part # RM-035-1 is the correct size. However, neither are compatible with the Roadmaster Stowmaster tow bar. The adapters can only be used with tow bars that are mounted onto the motorhome instead of on the vehicle, like the Falcon 2, part # RM-520.
  view full answer...
• Will Blue Ox Acclaim Tow Bar Fit a 2010 Jeep Wrangler D-Ring Bumper
  Hey Doland, thanks for reaching out again! The Blue Ox Acclaim Non-Binding Tow Bar # BX4330 will only work with base plates that have the tabs spaced out 23" - 30" apart. Since your D-Ring mounts are closer together than that range, we'll have to get you setup with more of a standard tow bar. For that I recommend the Roadmaster Falcon 2 Tow Bar # RM-520 and you'll need D-Ring adapters to make this compatible with the D-Rings on your Jeep bumper. For this tow bar you're looking at either...
  view full answer...
• What Adapters Do I Need For My Demco Commander Tow Bars to Hook-Up to D-Rings?
  Hello Wayne, Great question. I would double check that the bumper with the D-Rings is rated for flat towing, not all bumpers are. The Roadmaster D-ring adapters will work on your Demco Commander. It depends on the thickness of the D-Rings on which ones you will want, if they are 3/4" # RM-035, and for 1" thick # RM-035-1. Their tech did state that you might want to get additional bushing since the Commander tow bars are a little thinner, you would be able to source these from your local...
  view full answer...
• Base Plate Kit Solution for 2015 Jeep Wrangler Willys Towed with Demco Tow Bar
  Thanks for the picture of your new 2015 Jeep Wrangler Willys Vicky. I can see that it has an aftermarket bumper on it so the standard fits for the Willys versions aren't applicable. So what you are going to have to do is measure the D-rings on the bumper and go with the correct D-ring adapter for it like the part # RM-035 if the D-ring is 3/4 inch thick or part # RM-035-1 if they are 1 inch thick. We don't have a way to determine what bumper you have from the picture that I can't attach...
  view full answer...
• Base Plate Options For A 2022 Jeep Gladiator With A Barricade Alloy Bumper
  Hello David. Based on what I can see online the Barricade Alloy Bumper has welded D-rings. Provided this bumper is tow rated, I suggest using the Roadmaster D-ring adapters # RM-035 for 3/4" thick D-Rings or # RM-035-1 for 1" and use a Roadmaster Falcon All Terrain, Non-Binding Tow Bar, # RM-522. I do suggest that you contact the manufacturer of this bumper and verify that it is rated for flat towing. If the bumper is not tow rated, the Roadmaster Direct-Connect Base Plate Kit # RM77VR...
  view full answer...
• Recommended Parts for Flat Dinghy/Recreational Towing a 2014 Jeep Wrangler Unlimited w/ AEV Bumper
  Would you be able to send me a picture of your AEV Bumper? Most likely you will need D-ring adapters but a picture would be a huge help. Also, you may want to go ahead and check to make sure that your bumper is rated for towing. Sometimes a bumper might look heavy-duty but isn't rated for towing the vehicle.
  view full answer...
  
• Base Plate And Tow Bar For 2004 Jeep Wrangler TJ With Warn Front Bumper
  Hello Walter, thanks for reaching out. If your Warn bumper has D-rings, we do offer tow bar setups that can attach to the D-rings on your bumper. You will need to use a D-ring adapter to connect the tow bar. We offer the D-ring adapters in the following sizes: 1" Thick D-Rings # RM-035-1 3/4" Thick D-Rings # RM-035 These adapters will work with the Roadmaster motor-home-mounted tow bars. For that I recommend the Roadmaster Falcon All-Terrain Tow Bar # RM-522. This is a very solid non-binding...
  view full answer...
• Flat Towing Components Needed For A 1984 Toyota FJ Land Cruiser
  Hey CJ, In order for you to use a tow bar you'd need a baseplate for the FJ or a for the front bumper of the FJ to have D-Rings and be rated to tow from. Since there isn't a baseplate available you'd need to go with the D-Ring option. Roadmaster offers D-Ring adapters (3/4" thick D-Rings # RM-035 or 1" # RM-035-1) for their tow bars that could go with the Falcon All-Terrain tow bar # RM-522. You'll also need some safety cables # RM-643 and some tow lights # RM-2120 to remain street legal....
  view full answer...
• Locks For Roadmaster D-Ring Tow Bar Adapters That Will Fit 1-1/2" of Clearance Next To D-Ring
  I recommend using the Master Lock 1-9/16" Wide Solid Brass Body Padlock # ML140DLH with the Hitch Pin # RM-910044 for the Roadmaster D-Ring Adapters # RM-035-1. The locks have a 1/4" diameter that will fit inside the Roadmaster pin. This will be much easier to fit with the tow bars on your d-ring bumper connections. The InfiniteRule Locking Pins # IR44FR will be difficult to position in the pin with the tow bar taking up the narrow 1-1/2" measurement you have. We currently do not have...
  view full answer...
  
• Compatible Base Plates For A 2022 Ford Bronco
  No, the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars # RM-035-1 would not fit your 1-3/16" thick mounts so you would need to go with a standard base plate. If you have a Ford Performance Heavy Duty Modular Bumper then you'll want the Roadmaster Direct-Connect Base Plate Kit # RM92ZR. If you have a standard bumper you'll want the Blue Ox Base Plate Kit # BLU97XR instead. For the tow bar I recommend the etrailer SD Non-Binding Tow Bar # e74ZR if you are...
  view full answer...
• Parts Needed to Flat Tow 2023 Ford F-150 Rapter With D-Ring/Shackles Bumper
  So long as you have verified with the manufacturer of the bumper that it is rated for flat towing, we can get your 2023 Ford F-150 Raptor set up with the parts needed. You'll need to use adapters with this bumper, and the right one is simply going to depend on the thickness of the shackles: - 3/4" Thick: Adapter for D-Ring Bumper Mounts to Roadmaster Motorhome Mounted Tow Bars # RM-035 - 1" Thick: Adapter for D-Ring Bumper Mounts to Roadmaster Motorhome Mounted Tow Bars # RM-035-1 Apart...
  view full answer...

Do you have a question about this Tow Bar Base Plate?