Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way
(173 reviews)
Price: $35.13
In Stock
Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way
Item # HM47570
Our Price: $35.13
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (173)
- Q & A (0)
- Photos
Hopkins Trailer Wiring - HM47570
- Wiring Adapters
- Multi-Function Adapter
- 6 Round
- 5 Flat
- 4 Flat
- Plug Only
- 7 Round - Blade
- Hopkins
Heavy-duty trailer adapter features a unique Quick-Change wiring plug that lets you switch between 6-way wiring codes quickly and easily. Outlet for 4-way and 5-way plugs is also built in. Terminals are covered with easy-open, weatherproof lids.
Features:
- Trailer adapter changes your vehicle's 7-blade connector to a 6-pole
- 4-Pole and 5-pole flat connectors also built in
- Quick-Change plug on 6-pole terminal accommodates both 6-pole trailer wiring codes - center-pin brake or center-pin hot
- Simply remove plug at base of connector, turn it around and plug it back in - no need to rewire
- Reinforced, easy-grip covers
- Open 180 degrees for effortless connections
- Internal seals for ultimate weatherproofing
- Rugged, oversize hinge
- Terminal grease packet included
- Works with 6-way, 5-way flat and 4-way flat trailer connectors
- 3-Year warranty
This adapter not only changes your vehicle's connector from a 7-way RV blade to a 6-way, 5-way or 4-way, it also has a patented Quick-Change wiring plug to accommodate both 6-pole wiring codes. Just remove the plug at the the base of the adapter, turn it and replace it to switch to a center-pin-hot design from center-pin-brake design, or vice versa. No rewiring necessary.
The heavy-duty, weather-resistant housing and covers on this adapter provide maximum durability. Even the oversize lid hinge is built to last, allowing the lids to open a full 180 degrees for simple connecting without breaking off.
47570 Hopkins Endurance Multi-Tow Adapter - 7 RV to 6 Pole (2 Wiring Codes), 5 Wire and 4 Wire Flat
Installation Details
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not fit
Customer Reviews
Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way - HM47570
Average Customer Rating: 4.9 out of 5 stars (173 Customer Reviews)
Heavy-duty trailer adapter features a unique Quick-Change wiring plug that lets you switch between 6-way wiring codes quickly and easily. Outlet for 4-way and 5-way plugs is also built in. Terminals are covered with easy-open, weatherproof lids.by: Dan Cleveland07/18/2018
My '92 GMC Sierra had a 6-pin trailer harness connector and I'm going to be pulling a pop-up camper in a few weeks that has a 7-pin connector. I originally ordered a 47435 6-Pole to 7-Pole Trailer Wiring Adapter. After thinking about it for a day I changed my mind and ordered a HM48470 Hopkins Endurance Multi-tow 7-way, 5 & 4-wire Flat Connector to mount in the bumper and a HM47570 Hopkins Endurance Multi-tow Connect Adapter - 7-way To 6-way, 5-way and 4-way. The HM48470 will allow me to pull the pop-up as well as giving me the 4-wire flat connector that I need for my boat trailer. I bought the HM47570 adapter just to cover all the trailer wiring needs I might run into. I really like the fact that the 47570 adapter has the quick change plug to cover both wiring arrangements for 6-pin trailer connectors.
I placed the original order Saturday evening and the second order Sunday afternoon. Monday morning, I called etrailer.com to try to cancel the first order and was told that both orders were already boxed and on the way the shipper. I had no idea that they had people there to pull and box orders on the weekend. I asked about returning the first order when it arrived and was told by Helen M that it would be no problem at all.
I have been extremely pleased with my purchase experience with etrailer.com. Everyone I spoke with there was very knowledgeable and I will not hesitate to go directly to them for my trailer and towing needs in the future.
by: GERSON S VALLES03/25/2013
I needed an adapter for my electrical towing harness so the that I could use a 5-Way connector on my 7-WAY plug. On line, I found and ordered Item No. HM47570 "HOPKINS ENDURANCE MULTI-TOW CONNECTOR ADAPTER - 7-WAY to 6-WAY, 5-WAY or 4-WAY." When I received the product, I was really stoked, it was exactly what I needed and what I had been looking for! I tried it on for "size" as you might say and it's going to work like a charm. I will send some photos later when I'm done with the installation! No time right now. . this coming weekend! Photo 1&2 my connector; Photo 3&4 the new HM47570; Photo 5,6,&8 the light bar I wanted to install and the completed project. Thanks a bunch!
by: Noel04/06/2024
Works great. I’ve had no issues whatsoe ver!
by: Steven04/03/2024
Just what i needed.
by: Shane 04/07/2023
This is the best all in one connector for your 7 way wiring harness. It allows you to use pretty much every connector for personal vehicle trailers.
by: John 02/26/2024
Item as described. Delivered when promi sed
by: John P. (JP)10/13/2017
PERFECT ITEM... NOT ONLY DOES IT WORK FOR MY SPECIFIC APPLICATI0N... BUT GIVES ME OPTIONS TO HOOK UP MOST ANY TYPE TRAILER WIRING...
by: Roy 12/11/2021
Just what I needed to be able to connect virtually any trailer to my vehicle. Price is good, shipping $ were reasonable, and product was received quickly. etrailer is my first choice for all things towing
by: Jesse P02/20/2017
This product really is just "plug-and-play". I have a 2012 Chevy Traverse with the strongest towing package available for that vehicle. It comes with a 7 way receiver. I tow a 1998 viking 2490 pop-up camper that came with a standard 4 pin which I rewired to a 6 pin round adapter so that I could add a battery to the trailer and charge it while I was going down the road. It works great! No problems whatsoever. This is actually the second HM47570 that I have owned because I backed the first one into a high snow bank and broke it.
by: Michael09/06/2019
This trailer connection works as advertised. The best thing is the reversible switch apparatus which allows one to go from one type of connection, i.e. 12-volt, to a pole for brakes. It's nifty.
Michael N.
9/7/2020
I have used this product several times during the past year of ownership. Works great. Really handy.
by: Spence01/24/2021
This is truly an all in one hitch plug adapter. I help several neighbors from time to time, pull many varied trailers, on a highly trafficked recreational river. I haven’t found a trailer plug I can’t plug into this adapter. And it’s parts are holding up well after a year. One and done! You’ll need a 7 pin hitch receptacle and then you’re covered for 7 pin, 6, 5 ( yes, the 5 pin), and 4 pin plugs. Bought a couple more for neighbors that had 7 way plugs on their vehicles.
by: Joe 09/18/2019
This has to be the coolest adapter I have ever owned. I needed to tow a boat with surge brakes and needed power from the reverse lights to prevent the surge brake from locking up the trailer while backing. I was not sure this would work but thought I would give it a try. It is a little larger than expected and felt like it sagged down a little when plugged into the truck. However, the spring door caught the top of the adapter with no problem. I plugged my 5 flat plug on the trailer and and put it in reverse. worked like a charm. I checked with a multi meter and indeed 12v were sent to the 5th plug on my 5 flat when in reverse. I can now pull three trailers I own with this one adapter. I have a 5 flat, 4 flat and 6 round plug on each of the three trailers. If a purchase a trailer with electric brake, you can pull the plug, turn it 90 degrees and plug it back in. Watch the video etrailer produced describing this outstanding adapter. I will be ordering a second as a backup. Oh....just towed a trailer 250 miles and the adapter was still secure in the truck ever though it sagged a little.
by: Garbage Man05/31/2019
This trailer plug adapter is a "must have" item if you have a truck set up for Hot Shot or if you pull several different types of trailers. I use this adapter at least 3 times a week (plus I have 7 round pin plug for hauling agriculture trailers). I haven't had to use the "trailer break reversal" wire yet, but this is the main reason to purchase this adapter. This is a well built, Great product, well worth the money.
by: Rick J05/16/2017
This little unit is a must if you ever rent or borrow a trailer. It'll get you through any trailer connector need. As always, the purchase and shipment from etrailer were awesome.
Rick J.
5/17/2018
Thank you for checking in. I am still happy with my purchases - Ive had occasion to use my Hopkins adapter several times. We own two now, and theyve never given us a moments trouble. Great item to have in the console of every potential tow vehicle.
by: Ron (The Boat Doc ) 10/31/2011
Being a former boat dealer, now a fisherman, and a rancher, I back-up to, and, tow a lot of different stuff. This lets me make sure my hook-up is "legal" with lights!! The ball mount works great with my NEW tow vehicle!! The vehicle is a 3/4 ton, and, comes with a 21/2" to 2" adapter for the factory receiver. The locks & the rest are just niceties in this "steal whatever you need" society?!!
by: Mike05/12/2014
As advertised. Well made too. The spring for the cover/seal is robust and I don't expect it to weaken. The adapter works perfectly with my Pollack 7 pin outlet and captures on the retaining clip as both are desiged, so the adapter is securely in place down the road.
The ability to reverse polarity on the 6 pin trailer brake set up is really nice, but I suggest to have a pair of needle nose pliers handy to stuff the wires back in the housing so you can get the two terminal plug re-inserted. A bit to fiddle with, but once you set it up for your own trailer, you never would mess with it again. Good product. You wont be disappointed.
by: GERSON S VALLES03/21/2013
I needed an adapter for my electrical towing harness so the that I could use a 5-Way connector on my 7-WAY plug. On line, I found and ordered Item No. HM47570 "HOPKINS ENDURANCE MULTI-TOW CONNECTOR ADAPTER - 7-WAY to 6-WAY, 5-WAY or 4-WAY." When I received the product, I was really stoked, it was exactly what I needed and what I had been looking for! I tried it on for "size" as you might say and it's going to work like a charm. I will send some photos later when I'm done with the installation! No time right now. . this coming weekend!
by: Richard L06/18/2019
This adapter sold by etrailer.com solved my wiring problem pronto ! My "new" 2012 Buick only had a 7 point RV plug. I needed a 4 pin trailer outlet. Did not want to rewire half the car to get one. Vanessa at etrailer knew immediately what the fix was. Adapter worked as advertised. Problem solved. Great customer service !
by: Andrew 05/09/2020
My stock plug has a pretty tight cover that bends the wires on my flat plug for my utility trailer a bit too much for my comfort and this one just flips up and snaps closed, so no tension when it is open. Works very well for my wiring and I have many options for plugs than I had to begin with. I use this all the time and it is great!
by: DAN CRULL11/23/2016
NOW THIS IS PERFECT FOR HOOKING UP AN EXTRA LIGHT AND OR DISCONNECTING BRAKES REAL FAST IF THERE IS AN ISSUE GREAT ITEM AT A GREAT PRICE
Dan C.
11/23/2017
works great , use it all the time
by: TJFREEDOM06/24/2016
This is the adapter that I have been looking for. I was skeptical at first as I deal with vintage utility trailers. These types of trailers have heavy long metal cylinder 6 plug connectors and the fear of keeping them from falling out (along with the adapter is huge. The heavy conductors fit nicely into the adapter. I tie a couple of small ball bungees around everything just to be safe. My only complains is that I wish they were Made in America!
by: Randall 01/20/2021
I have other Hopkins Multi-tow trailer adapters. I like that this one can operate both 6 way types. Whether it was the brake used or neutral. All you have to do I remove the piece and flip it around. You do not need two adapters.
by: Steve B.04/08/2017
This thing is a beauty, if you have a 7 pole trailer wiring kit, this is a must have. You will never need another set of adapters because you're covered from 4 pole to 6 pole with the adapter and 7 pole when you remove it. Can't go wrong, great quality and the reverse mode for hot circuit/trailer brakes is a great touch. 10/10
by: Dr. Bob01/05/2017
Perfect for trailering my boat (5 flat plug). FINALLY resolved my issue with trailer brakes locking up in reverse. Appears to be well made as I have used it for a year and still works fine.
by: Damion L. 07/02/2016
It's an excellent product, them other cheap 7 to 6 way don't let the trailer brakes work with out changing wires.
This one quick plug to change from power brakes to aux. Plus it has the 5 way and 4 way. It's got them all in one. Excellent product.
25
173
Show More Reviews
See what our Experts say about this Hopkins Trailer Wiring
- Recommended 7-Way Connector for a 2023 Honda Ridgeline No, it won't but I have one that does. The Hopkins item # HM47570 is just an adapter that plugs into a round 7-way connector. To connect to your Ridgeline's factory 7-pin you will need the T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector item # 118288. This will replace your 4-way. If you want to have both a 7-way and 4-way connector on your Ridgeline you'll want to install the Hopkins Endurance Multi-Tow Twist-Mount 7-Way RV and 4-Way Flat Trailer Connector item # HM40920...
view full answer... - Adding a 6- and 4-Way or 7- and 4-Way Trailer Connector to a 2004 Ford F-150 Crew Cab 4x4The instructions for Curt 6-Way Round and 4-Flat Connectors # C55664 is listed only for certain GM vehicles and some imports (see instructions link for the list) but not for a 2004 Ford F-150. However, it should still work because it has the same connector to plug into the factory harness as # C55774 which is a 7- and 4-Way that is listed as a fit for a 2004 Ford F-150 that came with a factory 7-Way. If your truck came with a 4-Way then you would not be able to use either connector but...
view full answer... - Adding a 7-Way Trailer Connector to a Trailer with a Surge Brake Coupler w/Electric Reverse LockoutIt is possible to re-pin an adapter like # HM47570, but it would be much easier to add a 7-Way trailer connector to the trailer side and wire it accordingly to function with your reverse lockout. You can use Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End, # PK12706, and wire it to match your vehicle side 7-Way. The center pole on the vehicle side 7-Way will need to be connected to the reverse light circuit. The new trailer side 7-Way would then need to be wired...
view full answer... - Available Wiring Adapters to Join Vehicle 7-Way to Trailer 6-Way Round ConnectorWe offer several trailer wiring adapters that can convert a 7-way blade connector on the vehicle to a 6-way round pin connector on the trailer. You can see all of these on the linked page. These include solid adapters like # HM47570 as well as cabled types like # HM47053 and # HM47083. I recommend a cabled adapter since it will provide strain relief and make it easier to do the connections. You need to note that a 6-way can be configured in either of two ways. Please refer to the linked...
view full answer... - Integrated Brake Controller, Hydraulic Brakes and Trailer Wiring for Boat TrailerIf your boat trailer has a mechanical surge actuator coupler like # DM72VR then no trailer brake controller is required. The inertia of the trailer moving forward provides the compression to push hydraulic fluid to the brakes. If on the other hand you have an EOH system, electric-over-hydraulic, such as with an actuator like # HBA-12 for drum brakes or # HBA16 for disc brakes, then you DO still need a trailer brake controller to deliver the electrical signals to the actuator, which then...
view full answer...
- Combination 7-Way/4-Pole Vehicle Socket for Hardwired InstallationTo hardwire a new 7-way/4-pole vehicle side socket you can use part # HM48470 from Hopkins. This item allows use with 4- and 5-pole flat trailer connectors and 7-way round trailer connectors. It has screw terminals to allow connection of your vehicle wiring and it includes a mounting bracket, hardware and dielectric grease to help keep your connections clean and corrosion free. You can refer to the linked article on trailer wiring for guidance. Be sure to wire the socket based on wire...
view full answer... - Converting 4-Way Flat on a 2005 Honda Pilot to a 5-Way or 6-Way Round Trailer ConnectorIf the trailer does have a 6-Way round then you can use adapter # A10-6034VP. This will give you the basic light functions but unless you connector the other wires on the adapter and use a brake controller you will not be able to use the trailer brakes, if equipped, or provide 12 volt power to the trailer. The white wire on the adapter must be connected to the vehicle frame. The black wire on the adapter connects to the positive terminal of the vehicle battery via a 40 amp circuit breaker...
view full answer... - 7-Way to 6-Way Adapter Recommendation for 2017 Ford F-250Sounds like you need an adapter to go from the 7-way on your to a 6-way. For that you would want a Hopkins Endurance Multi-Tow Trailer Connector Adapter # HM47570.
view full answer... - Brake Controller and Trailer Wiring Installation on 1997 Jeep Grand CherokeeTo install a brake contorller on your 1997 Grand Cherokee, you'd first need to install a 4-pole connector, using the Tow Ready # 118349. How you'd proceed next will depend on the connector use on the trailer you'll want to pull. I'd recommend using a 7-way because it's the most common. You can always use an adapter like part # HM47570 to convert it to anything else you'd need. To actuate the electric brakes on the trailer, you'd need a brake controller. I'd recommend going with a proportional...
view full answer... - Availability of a 6-Way Connector for a Tow Vehicle That is Compatible With Bargman Part # 50-61-108There are a few different options for you so that the 6-Way Molded Connector with Cable # 50-61-108 is compatible with a connector on your tow vehicle. If you already have a 7-Way connector on your tow vehicle you can simply use the Hopkins Endurance Multi-Tow Trailer Connector Adapter # HM47570 which will convert your 7-Way to a 6-Way with the option to connect a 5-Way or 4-Way without an adapter as well. If you are simply wanting to rewire the connector on your tow vehicle so that it...
view full answer...
- Location of Ground Wire Connection on 6 Pin Trailer Connection on 2001 Chevy SilveradoFor a 6 way round connection, like you find on the Hopkins Adapter 4 Pole to 6 Pole and 4 Pole Trailer Wiring Adapter # 37175, the ground wire will be located in the 2 o'clock position as you face the connector. The back of the connector (10 o'clock position) will have the ground wire which will be connected to the frame of your vehicle and should have a bare metal to metal connection. I've attached a photo and an article to assist. If you have a 7-way and need to have a 6-way connection...
view full answer...
- Does Hopkins Endurance Multi-Tow Trailer Connector Adapter, # HM47570 Come with a Mounting BracketThe Hopkins Endurance Multi-Tow Trailer Connector Adapter, # HM47570, is meant to plug into a 7-Way trailer connector that is already mounted on the back of a vehicle so it does not come with a bracket. The Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector, # HM48470, does come with a mounting bracket. The only difference between this connector and the first one is that it does not have a 6-Way function. I have included a link to the installation details for this connector...
view full answer... - Trailer Turn and Brake Lights Not Working with 2018 Nissan Pathfinder Your 2018 Nissan Pathfinder does require a couple of blue relays to be installed to fully activate the tow package so that the turn/brake signal lights work on the trailer when connected. The relay harness on your Pathfinder gets plugged into a factory port at the rear of the vehicle behind some paneling on the driver side. I have attached an installation video that you can use for reference where we use the Tekonsha T-One Wiring Harness # 118670, which includes the needed relays. The...
view full answer... - Will the Hopkins Endurance Multi-Tow Adapter Work on 2020 Toyota Tundra for Trailer With 6-Pole PlugThe Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way # HM47570 converts a vehicle's 7-blade connector to a 6-pole connector. Yes, this will work on your 2020 Toyota Tundra. All you will need to do is plug the adapter into the 7-way connection on your vehicle. Once the adapter is in place you can plug in the 6-pole from your trailer and you will be ready to go.
view full answer... - Availability of Trailer Wiring Adapters to Convert from 6-Pin Round Connector FormatI linked our main page for all trailer wiring adapters that convert from a 6-round-pin format to others. We do have a 6-round to 6-square adapter, part # HM47415, but not one that converts a 6-way round pin to a 5- or 6-flat. 6-flat is not a common format for tow vehicle and trailers in the U.S. For the long run you will be better off avoiding use of an adapter and hardwiring in the connector you need. Adapters are convenient but they also introduce more connection points and that means...
view full answer... - Wire Color Identification of Tow Bar 4-Way Wiring for Splicing in Additional LightingThe green wire of the 4-way connector you sent in a picture of is the right turn/stop circuit, the yellow is left turn/stop, brown is running light, and white is ground. You could use the # 18252 to easily splice into the circuits as well to make an additional connector.
view full answer...
- How to Determine the Wire Functions on a Trailer to Install a 7-Way Blade ConnectorThe first thing you are going to want to do is determine the function of each of the wires. You cannot go by color alone because there is no standard color code. There are 2 ways that you can determine the wire functions on the trailer. First you can trace each wire back to see where it goes. The other way is to attach each wire, one at a time, to a separate car battery and see what function turns on. Once you have determined the functions you will wire in a 7-Way as follows: If looking...
view full answer... - Replacement 4 and 7-Way Trailer Connector for a 2000 Ford F-350You can use the Hopkins 4/7-Way connector # HM48470. All you will need to do is attach the wires from the old connector in the same places on the back of this connector then mount it where you want it. No other wiring harnesses are needed. The replacement 7-Ways we have for a 2000 Ford F-350 that also have the rectangular plug do not have a built-in 4-Way. We have # C55243 and # 118243. You could use one of these and then use an adapter, # HM47570. If the truck came with the factory 7-Way...
view full answer... - Can I Add A Wire Harness To My Camper To Make It Tow Another Utility Trailer We highly recommend against double towing and many states either don't allow double towing or have numerous restrictions. There are some states that limit the total length of all 3 units, some only allow certain types of trailers behind the 5th wheel trailer, and some require a special endorsement on your license to be allowed to double/triple tow. I recommend checking the laws for any state you plan on double or triple towing in. You will have to use a universal fit wiring harness like...
view full answer... - Troubleshooting Trailer Llights for 2004 Toyota TundraIf you already have a 7-way connector on your 2004 Tundra, then you would simply plug in the trailer. If you have the 7-way and the trailer is a different compatibility, you can use adapter # HM47570. If you have the factory connections but are missing the trailer connector, then you would use the Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors # HM43385 or the Replacement Multi-Plug 7-Way and 4 Pole Trailer Connector # 20137. Both...
view full answer... - 7-Way Recommendation to Allow a 7-way and 4-way to be Used SimultaneouslyYes, you could use the 4-way and the 6-way of this Hopkins Endurance Multi-Tow Trailer Connector Adapter # HM47570 simultaneously. Since the bar on your pickup will be LED and LEDs hardly draw any amperage it should not be a problem for you at all. In case you are looking for a trailer connector that already has a 7-way and a 4-way on it you would want a Trailer Connector like part # HM40975. This would replace your existing 7-way and give you a 7-way and a 4-way as an option. The # HM47570...
view full answer... - 2018 VW Atlas 7-Pin Round Vehicle Connector and Brake Controller for Use w/ a 6-Way Adapter Thanks for the picture! It looks like your 2018 VW Atlas has been wired for a 7-way and has everything but the actual 7-way connector. To use the Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way item # HM47570 you will need the Hopkins Endurance Quick-Install 7-Way Trailer Connector item # HM40940. Both of these combined will give you a 6 pin round and a 4-pin flat connector. I have linked a review video that you will want to watch when connecting your...
view full answer...
- Will Hopkins Multi-Tow Trailer Connector # HM47675 and the # HM47570 Fit a 2016 Chevy Tahoe 7-WayYes, the Hopkins Multi-Tow Trailer Connector # HM47675 and the # HM47570 will both fit the 7-way you have at the rear of your 2016 Chevy Tahoe.
view full answer... - Towing Chrysler PT Cruiser Convertible with RoadMaster Tow Dolly with Electric BrakesAs long as you have hitch at the rear of the vehicle that has towing capacities to tow your vehicle and a drawbar with similar weight capacities that has a 2 inch ball you have everything you would need to use a RoadMaster Tow Dolly with Electric Brakes, part # RM-2050-1. This tow dolly comes with electric brakes, safety cables, adjustable axle and ramps, and adjustable wheel nets. Once you assemble the tow dolly you will just need to hitch up the tow dolly to the ball of the drawbar and...
view full answer...
Do you have a question about this Trailer Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Rachael H
Video Edited:
Joshua S
Video Edited:
Jacob T
Video by:
Kathleen M
Video by:
Alan C
Installed by:
Shane T
Installed by:
Randy B
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Roy
12/12/2022
After a year, the wiring kit is still 100. Have used it several times on both personal and rental trailers