See what our Experts say about this Dexter Trailer Suspension Parts

• Limited Tire Clearance with Stock Tire Size on a 2006 Forest River Cherokee 27Q
  We recommend having a minimum of 3" between the top of the tire and bottom of the fender in order to allow for proper suspension travel. However, based on the photo you sent I believe you need new leaf springs as the ones you have appear to be almost completely flat. This has then compromised your tire clearance. The flattened leaf springs could either be a result of overloading the trailer or just general wear. In order to replace them you would need to know your axle capacity and the...
  view full answer...
  
• Recommended Shock Absorption for Keystone Montana 5th Wheel with Tandem Axles
  Trailer suspension uses different components for the air systems than the frame mounted suspension you are looking at. For your tandem axle Keystone Montana, I recommend the Lippert Components Trailair by Center Point Air-Ride Suspension Upgrade - Tandem Axle # LC1565391 which will give you adjustable air pressure in the form of an equalizer for your leaf springs. If you want a trailer with air suspension, this is the way to go with adjustable air springs that can use manual valves or...
  view full answer...
  
• Suspension Upgrades For A 2011 Keystone Cougar 5th Wheel Trailer
  Hi Brian, To ensure you're getting the correct fit you'll want to measure the spacing horizontally from eyelet to eyelet and vertically from the hanger bolt eyelet down to the center of the shackle strap eyelets on your current equalizer. The equalizers in kit # K71-652-00 have a horizontal measurement of 5-3/4" and vertical measurement of 2". The included shackle strap kit comes with a 2-1/4" spacing so it wouldn't be the correct fit for your trailer. The most common sizes are 2-1/4"...
  view full answer...
  
• Locating Replacement Leaf Springs for Dexter D44 Tandem Axles and Recommended Upgrades
  In order to find the right replacement leaf springs, you will need to raise the trailer up and take some measurements on one of the existing springs. This type of information isn't typically provided by trailer manufacturers and it's not something that can be determined by the axle capacity (many different leaf spring lengths could be used with 4,400 pound tandem axles). With all the weight lifted off the leaf springs, you will just need to measure their length (from the center of one...
  view full answer...
• Dexter E-Z Flex Suspension Equalizer for 2020 Nitro Boat Trailer
  Your 2020 Nitro Z19 Tandem Axle Boat Trailer weighs around 4,000 lbs. For that weight I recommend using the 6,000lb Dexter E-Z Flex Suspension Kit item # K71-652-00. This kit is designed to replace equalizers with a 5-1/4"-6-1/4" distance between the center of the leaf spring bolts. Included in this kit are 2-1/4" heavy-duty shackle straps. You will want to verify the size of your current equalizer to verify this will fit.
  view full answer...
• Replacement Leaf Springs and MORryde CRE3000 for 2021 Coachmen Freedom Express 292BHDSLE
  What is the length of your current springs? Also what is the wheelbase distance between your trailer axles? With that info I can see what components you'd need.
  view full answer...
• What Suspension Upgrade Kit For 2021 Grand Design Momentum 29G Trailer
  Hi Luis, I sure can get you the exact suspension upgrade for your 2021 Grand Design Momentum 29G trailer. Grand Design is one of the only trailer manufacturers that has any info about the parts on their trailer (which we love around here), and so I know that the equalizer you have is the Curved Equalizer # TREQ104. The exact kit you need, which includes an upgraded cushioned equalizer, wet bolts, and heavy-duty shackle straps, is the Dexter E-Z Flex Suspension Kit # K71-652-00.
  view full answer...
• Looking For Replacement For 013-143-03 Equalizer And Dexter Shocks On 2018 Cruiser 2916 RV
  Hey Bill, thanks for reaching out. The best replacement for your Dexter 013-143-03 Equalizers are the Dexter E-Z Flex # K71-652-00. This is identical in size to the current equalizer so it will be an exact replacement. This kit comes with new wet bolts and 2-1/4" shackles so please make sure the current shackles are also the 2-1/4" from center hole to center hole. As far as replacing the shocks, the Replacement Dexter Bolt-On Shock Kit # K71-697-00 is what I recommend. These shocks are...
  view full answer...
• Best Auto Leveling System for 2014 Keystone Avalanche 5th Wheel Trailer
  They definitely can Luis! The Ground Control systems are the most convenient, easiest to use leveling systems available, and allow you to level your 5th wheel by pressing a button. The only thing you'll have to determine is which set-up you need, the 4-point system item # LC358590 or the 6-point system item # LC675817. I attached a diagram below that will show you the measurements you'll need to take. The 4-point system item # LC358590 will be correct if the distance between the center...
  view full answer...
• Can E-Z Flex Rubber Suspension System Work w/ Wide Trax Trailer Suspension
  I have a possible solution for you, but unfortunately the E-Z Flex Heavy Duty Rubber Suspension System such as the 5-5/8" Equalizers # K71-652-00, will not work with the Wide Trax suspension on your trailer. The axles on a Wide Trax system are spaced further apart and the required equalizer components are significantly larger than the E-Z Flex Systems. A much larger equalizer like the 14-5/8" Equa-Flex Cushioned Equalizers, part # LC314336 may be the correct length. You will want to measure...
  view full answer...
  
• Can Dexter E-Z Flex Suspension Kit Replace Dexter 13-10 Equalizer
  Your 13-10 equalizers, which should be equivalent to Equalizer # TREQ310 measures 6-1/16 inches from bolt hole to bolt hole (see accompanying photo) and due to that you will need to use the E-Z Flex Heavy Duty Rubber Suspension System # K71-652-00. Your equalizers are not long enough to use the other kit you referenced; the replacements you select do need to measure up from bolt hole to bolt hole. I have added a link to a video review and video install for you to check out as well.
  view full answer...
  
• Cushioned Equalizer Upgrade Recommendation for 2012 Forest River Work and Play
  Mark, the Dexter EZ Flex part # K71-652-00 can be used to replace your # TREQ310 and is cushioned like you are wanting. The 25-1/4 inch leaf spring size is very common but you didn't mention what axle capacity you have so if you needed a 5k spring you'd part # e44sr, 4k axle part # e57SR, or 6k axle part # e34SR. Keep in mind going with a little higher of a capacity than needed is perfectly fine.
  view full answer...
• Cushioned Equalizer Recommendation to Replace TREQ104 Equalizers
  Best option for a cushioned equalizer kit to replace a equalizer part # TREQ104 would be the EZ Flex part # K71-652-00 which matches closely to the dimensions you have, does an excellent job cushioning the trailer suspension and comes with wet bolts like you are looking for.
  view full answer...
• What is Cushioned Equalizer with Shorted Distance between Front and Rear Bolts
  Hey Dan, I would be willing to bet that if you jacked the trailer up a bit it would allow the worn out equalizer to stretch out a bit and it would be a little longer. That said the shortest (front to back) cushioned equalizer we offer that would work to replace your Equa flex would be the Dexter part # K71-652-00 which has the distance between the bolts of 5-3/4 inches. Your Equa flex was originally this long as well.
  view full answer...
• Which Equalizer is Better? The Lippert Center Point Air Ride or the MORryde Rubber Equalizers.
  Hey Virgil. The Lippert Center Point by Trailair Air-Ride Suspension Upgrade item # LC1565391 is the top of the line when it comes to equalizers. They are hands down a better option than MORryde equalizers like item # MR87ZR. The built in air bags can be fine tuned and adjusted to fit your comfort. They do a great job of improving your ride by dampening road shock. Additionally, when you replace your equalizers you'll also want to swap out your wet bolts and shackle straps. Wet bolts...
  view full answer...
• Trailer Suspension Enhancement to Help With Bumpy Ride While Empty
  Hey David! Trailers without a load are generally more susceptible to bounce so that is not surprising to hear. This can be really uncomfortable, especially if you're towing like that often. An upgraded equalizer will help, however, I think shocks would be a better choice in this case. Shocks work in both directions (up and down) so they will reduce that bounce and smooth out the ride. Do you know your axle capacity? If you have 3,500 lb axles you can add two of the Lippert Bolt-On Shock...
  view full answer...
• Troubleshooting Weak Brakes on 2008 Everest After Having Bearings Repacked
  Either they somehow got grease on your brakes and they aren't working because of that or the brakes are way out of adjustment. Are the brakes manual adjust or self -adjust? If they are self adjust they should start working again after a several brake applications while moving. If they are manual adjust you'd want to click the star wheel of the assemblies until you feel a light drag as you turn the wheel by hand. Either way though I'd recommend speaking with the shop you had work on the...
  view full answer...
  
• Is There Trailer Lift Kit that is Compatible with Dexter EZ Flex Suspension
  Hey Kevin, we have the Correct Track Lift Kit part # RR23QX which is a 1-1/4 inch lift that is compatible with the Dexter EZ Flex equalizers. Would that be enough of a lift?
  view full answer...
• Could Equa-Flex Cushioned Equalizers Fit 2018 Heartland Prowler LX25
  Most likely the Equa Flex equalizers part # LC279687 will fit your 2018 Heartland Prowler lx25 since they are designed to fit most applications. But you'll need to compare the dimensions of what you have to the picture I attached to make sure these are the same so they'll fit. The Never Fail hardware kit part # LC281285 then would work well with this.
  view full answer...
  
• Replacement Equalizers for a 2021 Keystone Cougar 22RBSWE
  Hey Mason. In order to determine if the Dexter E-Z Flex Suspension Kit item # K71-652-00 will fit I need you to measure the actual equalizer. You'll need to measure from the center of the bolt holes across your equalizer from the left to right and from the top bolt to the center line of the first measure. I have attached a diagram below of the item # K71-652-00 so you can compare the measurements you get to it. If you could add this information and any other questions you have where it...
  view full answer...
• Replacement Leaf Springs for 2005 Bigfoot 25B25RQ
  Hey Joe! Are these the leaf springs that came with your trailer? If so, I would say the length is correct. If they have completely flattened out over time that might account for the binding. I'm not sure how you measured so I went ahead and attached an article below which explains different ways to measure for your reference. Also, do you know your axle capacity? If you have 3,500 lb axles you could potentially use the # e59SR which is 23-1/8" spring eye to spring eye. If you have something...
  view full answer...
• Cushioned Equalizer Recommendation for Trailer Suspension
  Hey Rich, so I am not totally sure what components you are looking for a recommendation for but since your question came in off the Dexter EZ Flex part # K71-652-00 I would assume you are looking for a set of cushioned equalizers. For that I would recommend the MORryde AllTrek 4000 kit part # MR89DR as it's only option that has vertical and horizontal cushioning. This also fits the same 33 inch wheelbase as the EZ Flex kit you mentioned. If instead you have a 35 inch wheelbase what you...
  view full answer...
• Can Dexter EZ Flex Work on D44 Tandem Axles
  Hey David, yes the Dexter EZ Flex Equalizer # K71-652-00 will work great with the axles you have on your tandem trailer.
  view full answer...
• Replacement Leaf Springs for Pair of 6,000 lb Axles
  If you are measuring your current leaf springs and are getting 26 inches from the center of the spring eye to the center of the spring eye and they are older springs it makes sense that they were originally about an inch less than that because springs will flatten out over time. The best option we carry for your trailer is the 5-Leaf Double-Eye Spring for 6,000 lb Trailer Axles # e34SR which measures 25-1/4" long from center eye to center eye. You do not want your springs to go over the...
  view full answer...

Do you have a question about this Trailer Suspension Part?