Could Equa-Flex Cushioned Equalizers Fit 2018 Heartland Prowler LX25
Published 11/09/2018 >
Products Featured in This Question
Question:
Thank you Jameson for getting back to me. I did review the specs and measurements you sent prior to me contacting you. The measurements do not all add up. The only measurement that is the same is the distance 5 1/2" from leaf spring hanger eye bolt to eye bolt. The other measurements are not the same. Looking at the existing hangers they are Dexter 13-104. Im assuming I just need this item: Dexter Axle Trailer Suspension - K71-652-00 Would the Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 3K to 6K item # LC279687 kit work too? If so, which one woukd you recommend?
asked by: Brian G
Expert Reply:
Most likely the Equa Flex equalizers part # LC279687 will fit your 2018 Heartland Prowler lx25 since they are designed to fit most applications. But you'll need to compare the dimensions of what you have to the picture I attached to make sure these are the same so they'll fit. The Never Fail hardware kit part # LC281285 then would work well with this.
Product Page this Question was Asked From
Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 3K to 6K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 5-1/2 Inch Long
- Tandem Axle
- Lippert
more information >
Continue Researching
- Search Results: tool box
- Search Results: document holder
- Shop: BTBRV Magnetic Hitch Receiver Reducer Set - 3" to 2-1/2" & 2-1/2" to 2"
- Search Results: decor sealant
- Search Results: roof tape
- Search Results: decor
- Search Results: 15 aluminum wheels
- Search Results: reducer sleeve
- Shop: etrailer High-Low Adjustable Adapter for Tow Bars - 2" Hitch - 6" Rise/Drop - 10K GTW
- Shop: BTBRV Magnetic Hitch Receiver Reducer Sleeve - 3" to 2-1/2" - Black
- Shop: Timbren Silent Ride Suspension for Tandem Axle Trailers - 3" Round Axles - 35" - 7K
- Shop: Dexter 12V KTI Hydraulic Pump - Single/Double Acting - 6 Qts
- Shop: P&F Access Ladder for Enclosed Trailers - 6' Tall - Aluminum - Black
- Shop: P&F Enclosed Trailer Ladder Rack for 6' to 8-1/2' Wide Trailers - Aluminum - Silver
- Q&A: Replacement Hub and Drum Assembly For Axletek BD-865-37 Trailer Hub
- Video: DIY Install: LaSalle Bristol RV Roof Replacement Kit w/ XTRM Membrane on your 2005 K-Z New Vision
- Video: Breaking Down the LaSalle Bristol XTRM EXP 90 Adhesive for RV Roofs
- Q&A: Dimensions of the Removable Steel Foot with Pin for A-Frame Trailer Jacks
- Video: Black Armour Heavy-Duty Trailer Mat Review
- Q&A: Wet Bolt Kit for Tandem Axle Trailer With Dexter Equalizer K13-142-02
- Q&A: Comparing Equa-Flex and Road Armor Equalizers For 2000 Forest River WIldwood W/ 5200lb Axles
- Q&A: What is Recommended Clearance between Trailer Axle and Frame
- Q&A: Recommendation for Increasing Axle to Trailer Frame Clearance
- Q&A: What is the Minimum Space Between Tires on a Tandem Axle Trailer
- Article: Determining Trailer Tongue Weight
- Article: Double-Eye Trailer Suspension System Review
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs



Brian G.
11/9/2018
Thank you Jameson for getting back to me. I did review the specs and measurements you sent prior to me contacting you. The measurements do not all add up. The only measurement that is the same is the distance 5 1/2" from leaf spring hanger eye bolt to eye bolt. The other measurements are not the same. Looking at the existing hangers they are Dexter 13-104. Im assuming I just need this item: Dexter Axle Trailer Suspension - K71-652-00 Would the Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 3K to 6K item # LC279687 kit work too? If so, which one woukd you recommend?