Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These L-shape brackets make it simple to bolt an 8" or 9" wide, round fender to your single-axle trailer with 13", 14" or 15" wheels. Galvanized steel construction resists corrosion. One fender requires two mounting brackets.
Features:
Specs:
These L-shape brackets make it easy to mount a fender to your trailer. Simply bolt the fender to a bracket through the two top holes, and then bolt the bracket to the trailer through the two side holes.
California residents: click here
I'm very impressed with this company. Communicatio is fantastic, and often. The products shipped same day and arrived exactly when they said they would. The pricing was comparible or better than anything else I found.
They sent me an email updating me at every step along the way. They followed up with an email after delivery to make sure everything was good. I wish more companies performed this well. I will absolutely do business with etrailer.com in the future.
--VERY satisfied customer
These were way too short. I ended up mounting them vertically so they supported the step pad and using some bar stock to connect to the trailer frame.
The fender was a direct replacement and perfect fit on my trailer repair. Thanks for the complete description and measurements so I could get just what I needed. The shipping was fast.
I don't have them installed yet, in the process of rebuilding the trailer.
Good quality
I had a few tire blowouts that destroyed the previous plastic fenders. After ordering steel fenders and brackets from etrailer, my trailer looks brand new! Great delivery and products!
The fenders were delivered on time, fit my tandem trailer, and your email follow-ups were great.
Arrived quickly and is great quality.
Heavy duty! etrailer has been my go to supplier for anything trailer and once again they have hit a home run with these extra heavy duty fender brackets! Once mounted I believe they could support the weight of a elephant jump roping!
Chuck D.
10/13/2018
Well it has been a year and the fenders and extremely heavy duty brackets have held up great! Etrailer should be your go to online shopping mall for anything related to trailers!
Customer service assisted me tracking order after I messed up email address. Brackets arrived on time. They are plenty sturdy and should serve for years.
Bracket B.
4/5/2023
The brackets are dutifully supporting the fenders and adding a galvanized flash of silver to my black trailer.
Sturdy brackets well coated in Zinc
This combination of products will suit my needs very well. With the harsh winter road conditions of upper Michigan, they should resist corrosion and last quite a while. They will be mounted on an utility trailer used in camp for working in the woods. That's why I choose the sturdy flat top fenders, which will double as a work bench.
Duane
9/10/2015
They have been holding up quite well. They pretty much still look like brand new.
Fender was the exact replacement for the one that came loose and was lost from my trailer..
The product was fine in general . They Were also to sm. For my wheels .Your prices and shipping are outrageous high .
Very disapointed.
Nice heavy duty brackets. I searched quite a bit to find a bracket designed specifically for my jeep-style boat fenders, but without success. These are advertised for round fenders, but they fit the jeep-style as well. I think they would fit a pretty broad range of fender styles.
Phil
6/23/2017
Its been a year, and these brackets have held up well. No sign of corrosion after repeated immersions in salt water.
Howdy George,
Here's a couple shots of the new fender install in Orlando! Thanks for the cool products
Mitch
Very sturdy. Much more robust than the original brackets which all broke. Came on time with cheap shipping. Easy web site to use. The holes in the bracket even lined up with the holes in the fenders. That's good planning!
Bob C.
10/25/2017
I used the brackets to mount fenders on my boat trailer. They are still attached and working fine. The trailer has not made any long trips, however.
Heavy gauge galvanized metal that fit perfectly with the fenders I purchased from eTrailer. Can't speak to the quality of the galvanization yet.
Robert
11/3/2021
The trailer is stored outdoors year round, in Florida and Wisconsin. A year later, the effects of weathering on the etrailer parts are minimal. Not so with the rest of the trailer, where treating rust is a constant chore.
These are serious brackets! Glad I found them...perfect for my trailer rebuild as I wanted removable fenders which I got from you earlier! The best.
Eric
1/4/2023
These brackets worked out great. I had to weld some metal to my trailer to mount them to, but it is what I wanted. Had to make some homemade spacers too...use some solid maple from an old cutting board and they worked out perfect!
Great product! etrailer provided a video on the product prior to order so I knew exactly what I was getting. Product showed up as advertised high-quality and in a timely manner. Would definitely order again and recommend to others.
The customer service has been great. There was a hiccup in shipping but etrailer made all things good. No hassle. The fender is just what I supposed it to be , as per description on web. The jacks will be on my trailer soon. The fender mounts exceeded my expectations.
Nice steel unfinished fender to replace an aluminum fender ripped off my trailer by a tire tread thrown off a tire. As received, light surface rust in a couple of spots, expected on unfinished steel. Well packaged, quick handling and shipment. I also ordered a pair of brackets CE26098G-2, which are very heavy galvanized steel and Classic Accessories tire covers 052963762303, which appear to be very nice vinyl with a three year warranty. There was an issue with my credit card on the order page, quickly taken care of by Amanda in customer service. Now, if someone would just paint and mount the fender, all would be good.
The website stated the bore holes on the brackets were 4 inches apart. They are less than that by approx. 1/4 of an inch unless my tape measure and hardware store is wrong. Otherwise they are good quality and hopefully work. I haven't installed them yet. The fenders provided by etrailer were outstanding however. I suggest linking the appropriate mounting hardware with the fenders, or sold them together with the option to buy them separately.
Everything arrived in good condition. I will let you know h the installation goes when I get to it after thanksgiving.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim M.
11/10/2017
Brackets and fender still look great and solid