Replacement Tandem Axle Boat Trailer Fenders that Work w/ 14" Tires and Measure 65" Long  

Question:

Expert Reply:

We sure do William. We actually make a few sized fenders for boat trailers. Which specific ones you need are going to depend on how long your Trailstar trailer's fenders are now. If your current ones are 65" long or a bit less, I recommend our Tandem Axle Teardrop Trailer Fenders for Boat Trailers item # HP54VR in steel or item # HP34VR in stainless steel.

The Tandem Axle Teardrop Trailer Fenders item # HP54VR or item # HP34VR measure 65" long and look great on boat trailers. They're designed for 14" wheels and are 9" wide x 15" tall. These are made of 16 gauge steel and can be bolted to your trailer using mounting brackets like item # CE26098G-2. You will receive a set of two fenders for both the driver's and passenger side of your trailer.

I've attached a couple of pictures below of the item # HP54VR fenders installed, along with a diagram so you can compare their measurements to your Trailstar trailer.

The VIN you provided only gives me general information, like how long your trailer is and where it was built. It doesn't allow me to access individual part numbers or specs. If the fender's dimensions I recommend above do not match the ones on your trailer, I can take a look at other options we have if you can put your measurements below where it says Add Comment.

What kind of waters do you use your Nitro boat in and what kind of fishing do you do?

expert reply by: Jerred H

0

Trailer Fenders
(click to enlarge)

Trailer Fenders
(click to enlarge)

Trailer Fenders
(click to enlarge)

William W.

8/16/2026

my current tires are ST215/75R14; current fenders measure 104x10.5 wide x 10 tall. Did I send you a picture when I contacted you? I'd attach one here but don't see a way to do this. Your fender are shorter in length...I can see no foot step on each end makes for a longer length. The current tail lights are in the back end of the fender. Please advise and if a picture would help please let me know where and how to send it...thx

Jerred H.

8/16/2026

@WilliamW You did not send a picture in no. Unfortunately, we do not have any fenders that long or ones for tandem axle trailer's that have steps. None of ours have the ability to mount lights inside them either.

William W.

8/16/2026

I just sent more detailed photos. Is there a way for me to add separate steps to the frame? Also brake lense brackets?