Recommended Fenders for a 2008 Coachman Blast Toy Hauler
Updated 01/05/2026 | Published 09/26/2024 >
Products Featured in This Question
Question:
I have a 2008 coachman blast toy hauler with plastic wheel wells and I want to put steel or aluminum ones in place of them since the plastic ones are junk. It measures 60 inch long, 7 inch tall and 10 inch wide with a plastic edge on bottom of it that is flat that is 1.5 inch wide. I have a picture of it I can send as well. Thanks Jeremy
asked by: Jeremy
Expert Reply:
Hey Jeremy thanks for the information! You can email that picture to me directly if you would like. The closest replacement option we have to the measurements you gave me are the Tandem Axle Trailer Fenders item # HP22FR.
The item # HP22FR fenders are made of 16-gauge steel and measure 9" Wide x 60" long x 12" tall. They can be welded on or you can use mounting brackets like item # CE26098G-2 to attach them.
Product Page this Question was Asked From
Tandem Axle Trailer Fenders - Rounded Edges - Steel - 14" to 15" Wheels - Qty 2
- Trailer Fenders
- No Step
- 14 Inch Wheels
- 15 Inch Wheels
- 9 Inch Wide
- 60 Inch Long
- Steel
- Bolt-On
- Weld-On
- For Tandem-Axle Trailers
- etrailer
more information >
Continue Researching
- Shop: Redarc Smart Start Battery Isolator - Dual Sensing - 24 Volt - 100 Amp
- Shop: RV Solar Panel Installation Kit for 1 Panel - Self-Leveling Sealant, Butyl Tape, and Wire Loom
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Recommended Bearings for a 3,500 lbs Dexter Axle
- Search Results: butyl tape
- Shop: Front Mount Hitch
- Q&A: Extension Cables for the Go Power Overlander Expansion Kit 34282182
- Q&A: Solar Panel for Motorhome Pre-Wired With Go Power Solar Controller GP-PWM-10-SQ
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
- Search Results: trailer wiring
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Shop: Suspension Enhancement
- Search Results: trailer tires and wheels
- Video: In-Depth Look at the B&W 5th Wheel to Gooseneck Pin Box
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Replacement For An Atwood GC6AA-10E Water Heater
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch ball mount
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040


Jerred H.
1/5/2026
Hey Jeremy, how did the steel fenders end up working out on your Coachman Blast? Your update could make it easier for the next person looking to replace their plastic wheel wells.