Replacement Fenders For 1995 SR1800 Maxum Boat Trailer

Question

Question:

i have a trailer that was the stock trailer for a 1995 sr1800 maxum boat and I need to find fenders

asked by: Brian

0

Expert Reply:

Your boat trailer appears to be a single axle and likely uses 15" wheels. If that is the case, then I recommend Fulton Single Axle Trailer Fenders - Silver # F008595-2 (also available in Black # F008585-2). The kit of 2 plastic fenders simply bolts on, which is what I really like since getting weld-on fenders takes a bit more of your time and money for installation.

You will either re-use your current brackets and hardware, or you can use Mounting Brackets # CE26098G-2. You'll need two of these bracket kits in order to install both fenders.

If your trailer happens to have something other than 15" wheels, then let me know as you will need different fenders.

expert reply by: Andrew N

0

Barbara

4/22/2026

I have a Maxim 1800 and my tire size is 14 inches not 15 inches

Andrew N.

4/22/2026

@Barbara I'd take a look at these fenders as these are the ones we have for single axle trailers with 14" wheels. https://www.etrailer.com/dept-pg-Trailer_Fenders-pt-14_Inch_Wheels-sz-For_Single~Axle_Trailers-pc-Plastic.aspx

Helpful Links

dept-pg-trailer_fenders-pt-14_inch_wheels-sz-for_single~axle_trailers-pc-plastic.aspx

Answer 1

Yes! The Fulton #F008585-2 is compatible with the Galvanized Steel, U-Shaped, Bolt-On Brackets #PF1135-BKT-2 I've attached a helpful image that details the distances between the holes on this bracket. FYI, these brackets are a universal product.…

view full answer...

Answer 2

I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…

view full answer...

Answer 3

Hey Ryan, the bracket kit part #PF1135-BKT-2 is normally the best solution as long as the trailer has a frame rail that runs the perimeter of it. Then if the frame is 2 inches wide you would want the part #CE15284GA and you'd be set. The other…

view full answer...

Answer 4

We have an option that is very close to a perfect replacement for your fender. It's the CE Smith Single Axle Trailer Fender w/ Top and Side Steps, part #CE19503. This measures 40-1/8" Long x 10" wide x 10-1/4" tall, making it only…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Replacement Fenders For 1995 SR1800 Maxum Boat Trailer

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching