See what our Experts say about this CURT Custom Fit Vehicle Wiring

• Wiring Harness For Adding 7-Way To The Bed Of A 2022 Ford F-350
  Hello Travis, thanks for reaching out. No, the Curt T-Connector Vehicle Wiring Harness # C69CR is not going to be long enough to reach from the factory 7-way to the back of the bed on a 2022 Ford F-350. If you need to add a 7-way to the bed, you will need to use the following: - Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector for Aluminum Beds - 10' Long # C57010 What kind of camper are you hauling?
  view full answer...
• Will Curt T-Connector Vehicle Wiring Harness Fit 2025 Ford F-350
  Hi Robert; are you looking for a replacement 7-way or are you trying to add 5th wheel/gooseneck wiring? The Curt # C69CR you were looking at is designed to replace a 7-way at your rear bumper. If you are trying to add a 7-way to your truck bed for 5th wheel/gooseneck towing you need the # C57010 instead.
  view full answer...
• Will the Under-Bed Rail and Installation Kit Work on a 2024 Ford F-350 w/out the Puck System?
  Hey Tom! I am sorry but the Under-Bed Rail and Installation Kit item # RP30126 only fits up to the 2016 model years and no one makes a comparable after market puck system for the 2024 F-350's. For an autoslider set up you will have to add a set of 5th wheel rails to your truck bed. The PullRite Custom Installation Kit w/ Base Rails item # PUL99RR is custom fit for your F-350 and installs in predrilled holes in the frame. The PullRite SuperGlide 5th Wheel Hitch item # PUL63RR has a 20,000...
  view full answer...
• Does B&W Companion Fit 2022 Ford F-350 With Puck System and Bed Liner
  Yes, you're able to install the B&W Companion into your 2022 Ford F-350 Super Duty with the factory puck system and bed liner already installed. When installing the Companion you will have to cut the bed liner around the pucks as opposed to having to cut an entire square for the hitch to fit. With only cutting around the pucks the Companion Hitch will fit securely to your truck. If you have a spray in liner you will not have to cut out anything, and can leave as is. We have a couple options...
  view full answer...
• Recommended 7-Way Wiring Harness For A 2020 Jeep Grand Cherokee
  Hey Brent, If your 2020 Jeep Grand Cherokee has the factory tow package then you'll be able to plug in the Pollak 5th Wheel / Gooseneck T-Connector # PK11893-33-32. It may be necessary to see a local Jeep dealer to activate the tow package wiring circuit. If you don't have the factory tow package then you'll need to pick up and install the T-One Vehicle Wiring Harness # 118727 and then would be able to install the # ETBC7 to for the 7-way. I recommend picking up the No-Drill Mount...
  view full answer...
• Looking To Replace 7-Way Plug In Bed OF 2024 Ford F-450
  Hello Dennis, thanks for reaching out, and sorry to hear what happened to your 7-way plug. If you want to replace the 7-way in the bed of your 2024 Ford F-450 you can use the Curt T-Connector # C69CR. This will plug into the OEM tow package connector and give you a brand new 7-way in your bed with a spring-loaded cap. If you want to email me pictures of your plug I am happy to take a look. Just reply to the email that brought you to this page and it will go to me. It sounds like you might...
  view full answer...
• What Wiring do I Need for My 2017 Chevrolet Colorado Without Factory Tow Package?
  Hello Alan, I can get you set up with any connector you need. For your 2017 Chevy Colorado without the factory tow package, I have a couple of different options for you: - To put a 7 way and 4 flat on the back: Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector - Chevrolet/GMC # HM11141144 (you never know when that 7-way can come in handy). - 4 flat on the back: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Connector # HM11141164, then you would need an adapter...
  view full answer...
• Why Are 5th Wheel Wiring Harnesses So Long?
  Hi David! 5th wheel wiring harnesses, like the 7 foot long Bargman # 54700-003 (universal) or # 54701-007 (custom fit to your 2022 F-250), are made longer than most other wiring harnesses for convenience. What I mean by that, it allows you the convenience of putting the 7-way plug wherever you want or need in your bed. A shorter harness would limit you on where the 7-way could be installed. The vast majority of people doing this will end up with a bunch of extra wire that needs to be...
  view full answer...
• Difference Between Curt T-Connector Vehicle Wiring Harness C69CR and 56443
  Hello Raul; the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C69CR is identical to the 56443. We have are own part numbers, that is the only difference. You could splice into 4-way the functions on the # C69CR but we don't have a version of this with a 4-way integrated running off of it. You could also just run a basic 4-way like # C58044 and use that to connect to your dump body lights.
  view full answer...
• Recommended Replacement 7-Way Socket for a 2022 Ford F-250
  Hey Sam, it sounds like you're looking for the Pollak Replacement 7-Pole, RV-Style Trailer Connector # PK12706. This is a replacement socket that will utilize your original wiring and will replace your current 7-way.
  view full answer...
• Recommended Wiring Harness To Go With the Hopkins 7 and 4-Pole Trailer Connector
  Hey Christian, with the 7- and 4-Pole Trailer Connector # HM40975 you can use the 4' Pigtail Wiring Harness for Pollak Replacement 7-Pole RV Socket # PK11998.
  view full answer...
• Does Curt 7-Way Fit 2023 Ford F-350 Cab & Chassis
  Thanks for the photo, that was a big help. And the answer is yes, your 2023 Ford F-350 Cab & Chassis is 100 percent compatible with the Curt 7-way: - Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # C69CR Along with your photo, I added a photo cutout from the instructions of the # C69CR which show the connectors it fits, as well as a customer review which state it fit their '23 Ford Cab & Chassis.
  view full answer...
  
• Trailer 7-Way Blade Connector and Gooseneck Bed Connector For a 2021 Ford F-450 Flatbed
  You will need the Curt T-Connector Vehicle Wiring Harness # C69CR to plug into the factory connectors on your 2021 Ford F-450 cab and chassis flatbed. This will then allow you to use the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness # 41157 with the Curt Connector.
  view full answer...
  
• 2-1/2" Trailer Hitch Receiver & 7-Way Wiring With Brake Controller For 2024 Ford F-550 Cab & Chassis
  I do see the Curt Trailer Hitch Receiver # C15845 has been confirmed by Curt to fit your 2024 Ford F-550 Cab and Chassis with a 34" wide frame. For the wiring we do have the Curt T-Connector Vehicle Wiring Harness # C69CR which Curt has also confirmed will fit your F-550. This will give you a 7-way connector. The Tekonsha Prodigy P3 Trailer Brake Controller # 90195 along with the Wiring Adapter # 22292 will allow you to plug into the factory wiring connector under your dash.
  view full answer...
• Custom Fit 7-Way Trailer Wiring Harness for 2022 Ford F-350 Super Duty
  The Curt 7-way harness part number 56443 is our part number # C69CR which is a confirmed fit for your 2022 Ford F-350 as a replacement 7-way. We do not carry the YAW/TPMS harness you are looking for.
  view full answer...
• Can A B&W Companion Fit The Reese Elite Under-Bed Gooseneck Hitch
  Yes, the Reese Under-Bed Gooseneck Trailer Hitch w/ Custom Installation Kit # RP39FR would allow you to use an OEM base B&W Companion. The # RP39FR is designed with Ford's puck spacing so you would just need the B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package # BWRVK3300. If you have a shorter bed then you'll just want to switch to the slider base version # BWRVK3370 to ensure you have enough turning clearance for tight turns. If you don't have an in-bed 7-way then...
  view full answer...
• Difference Between 7-Way Connector With Flat Versus Round Connectors For 2022 Ford F-350 Super Duty
  The flat connectors you found on your 2022 Ford F-350 Super Duty is where the Curt T-Connector Vehicle Wiring Harness # C69CR connects to the factory wiring harness. This is designed as a replacement harness or for trucks that did not come with the factory 4/7-way connector. It is shorter as it is only designed to connect to the bumper. The Curt 5th Wheel/Gooseneck Custom Wiring Harness # C57010 is designed to tee in at the Bumper Connection # HM40975. This provides a 2nd 7-way connector...
  view full answer...
• Reese Custom 5th Wheel Mounting Brackets For A 2021 Ford F-350
  Yes, the Reese Quick-Install Custom Bracket Kit for 5th Wheel Trailer Hitches # RP50074 does fit your 2021 Ford F-350. If you' d also like to add a 7 way to the inside of your truck bed for, you can use # C69CR.
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?