Does Curt 7-Way Fit 2023 Ford F-350 Cab & Chassis

Question

Question:

Will this fit a 2023 F350 Cab on chassis? The harness is tucked at the back of the chassis and appears to be the same

asked by: Joel

0

Expert Reply:

Thanks for the photo, that was a big help. And the answer is yes, your 2023 Ford F-350 Cab & Chassis is 100 percent compatible with the Curt 7-way:

- Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # C69CR

Along with your photo, I added a photo cutout from the instructions of the # C69CR which show the connectors it fits, as well as a customer review which state it fit their '23 Ford Cab & Chassis.

expert reply by: Kyle S

0

Photo From Instructions of C69CR & Customer Review
(click to enlarge)

Photo of Connectors on 2023 Ford F-350 Cab & Chassis
(click to enlarge)

Answer 1

I can definitely help and get you set up. If your truck does not have any factory trailer wiring we will basically have to do this from the ground up. First you will install a 4 pin connector part #C58044. This will simply splice in using the…

view full answer...

Answer 2

Yes, it is available as an aftermarket part. To install an in-bed 7-way on your 2024 Ford F-350, you will need the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector for Aluminum Beds item #C57010. This harness puts a 7-way connector…

view full answer...

Answer 3

To make towing with a 5th wheel trailer easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector for Aluminum Beds item #C57010 to your 2023 Ford F-350. This harness puts a 7-way connector in the bed of your…

view full answer...

Answer 4

Happy to help, Kevin! When looking at parts needed for flat towing it's mostly about the vehicle you are flat towing and not so much the year, make, and model of the RV you're driving. The only thing we need to know about the RV is the type…

view full answer...

Answer 5

Hey Zack, for your 2023 Ford F-150 what you'd need to add both a 4-way and a 7-way would be the part #HM40975. This would plug into the round connector at the rear of your truck and would give you both connectors you need. If you don't have a…

view full answer...

Answer 6

Hey Andy! The correct Blue Ox base plate kit for your 2026 Ford F-250 is the #BLU58ER. This will be compatible with your Blue Ox Avail #BX7420. Do you have the rest of your setup already? If not, you will need the following: -Roadmaster 4-Diode…

view full answer...

Answer 7

Hi Robert; are you looking for a replacement 7-way or are you trying to add 5th wheel/gooseneck wiring? The Curt #C69CR you were looking at is designed to replace a 7-way at your rear bumper. If you are trying to add a 7-way to your truck bed for 5th…

view full answer...

Answer 8

Hey Ian, are you asking about the fifth wheel prep package? If thats the case just look in the bed of the truck. If you see a square of pucks over the rear axle with one also in the center that's the OEM prep package. See the attached picture to…

view full answer...

Answer 9

Yes, Nina, it will, but only when braking is actually applied. The Shadow 2 #RVi94FR physically pulls on the brake pedal in your towed vehicle, so it triggers the OEM brake light switch just like pressing the pedal would. During a breakaway…

view full answer...

Answer 10

Hello John, The Curt Ball and Safety Chain Loop Kit for GM/Chevy/Ford/Nissan Underbed Gooseneck Trailer Hitch - 30K #C60692 is the correct gooseneck hitch kit for your 2024 Ford F350 with OEM Prep Package. The part number that you mentioned…

view full answer...

Answer 11

The Curt 7-way harness part number 56443 is our part number #C69CR which is a confirmed fit for your 2022 Ford F-350 as a replacement 7-way. We do not carry the YAW/TPMS harness you are looking for.

view full answer...

Does Curt 7-Way Fit 2023 Ford F-350 Cab & Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching