See what our Experts say about this CURT Trailer Hitch Ball Mount

• Will the Curt Trailer Hitch Receiver C12163 Fit a 2016 Mercedes-Benz B250e
  If you are within 60 days of receipt of your shipment, you may return any new, unused item for a full product refund. However, the shipping and handling charges will be deducted from the product credit unless the return is a result of our error. All that you will need to do to initiate this process is contact our customer service team. The Curt Trailer Hitch Receiver part # C12163 that you referenced is listed as a fit for a 2014 - 2018 Mercedes-Benz CLA250. If the B250e is indeed as...
  view full answer...
  
• Recommended Euro-Style Ball Mount for a 2015 Nissan Altima with Curt Class I Trailer Hitch
  The recommended 2 inch Euro style ball mount for Curt trailer hitch # C11352 on a 2015 Nissan Altima is # C45572. I went out to the warehouse and pulled one to take some measurements. From the center of the pin hole to the part of the shank where it starts to bend up is 3 inches. This will work because the rear bumper on the Altima tapers upward above the hitch receiver. At 6-1/2 inches out from the center of the hitch pin hole, where the shank starts to bend straight up, it is at a height...
  view full answer...
  
• Trailer Hitch and Wiring for a 2005 Toyota Matrix
  Curt trailer hitch # C12221 would be a good option as long as your 2005 Toyota Matrix is not an XR or XRS model. If it is an XR or XRS model then # C12013 would be the best option for a Curt hitch. These are both Class II hitches which means you have to use the ball mount recommended by the hitch manufacture so as not to void the hitch warranty. This will limit the amount of rise you can get to be able to tow the trailer level. Based on the picture you have sent you will need a good amount...
  view full answer...
  
• Hitch Ball Compatibility with European Model of Thule Easyfold XT
  The US version of the EasyFold XT # TH903202 utilizes the trailer hitch receiver itself and not the hitch ball. The European style that fits onto the 50mm hitch ball has not been tested on a 2 inch hitch ball so I can't confirm the fit. I reached out to Thule and their North American tech group can't confirm the fit or not as they are not cross trained and don't have the ability to test fit the conversion. For a 50mm ball I recommend # 63912 for a standard ball mount like # 3593 for...
  view full answer...
• Picture of Curt Trailer Hitch Installed on a Cadillac CTS Coupe
  Curt has a nice picture of trailer hitch # C11196 installed on a Cadillac CTS coupe. I have include it for you here. The hitch receiver and cross tube are visible beneath the rear fascia of the vehicle. If you plan on doing any towing with the hitch then the correct ball mount to use is # C45571 for a 1-7/8 inch ball or # C45572 for a 2 inch ball. For trailer wiring you can use # C56044. I have linked the instructions for the wiring as well. If you are using the hitch for a bike rack...
  view full answer...
  
• How to Install the Curt Trailer Hitch Receiver on a 2013 BMW 128i
  The only hitch receiver we have confirmed to fit your 2013 BMW 128i is the Curt Trailer Hitch Receiver part # C11184. Unfortunately, we have not had a chance to install this hitch on a 2013 BMW 128i yet. However, the installation process is fairly straightforward and I will do my best to walk you through the process below. Before you get started you will need a few tools for installation: 8, 10, and 19mm sockets, 12" extensions, Ratchet, 19mm wrench, Flat Head Screwdriver, Rotary Tool...
  view full answer...
  
• Parts Needed To Be Able To Tow a Trailer With a 2013 Lexus CT 200h
  While we do carry all the components that you will need to be able to tow a trailer with your 2013 Lexus CT 200h it is not recommended for trailer towing by Lexus. That said you are likely past any manufacturer warranties that would be voided so the decision is yours to make. You will need the Curt Trailer Hitch Receiver # C11200 to attach either the 1-7/8" # C45571 or 2" # C45572 Curt Euro Style Drawbar. You will need to match the ball size to the coupler on the trailer. You will need...
  view full answer...
• Best Towing Set Up For 2019 VW Golf Alltrack
  We can absolutely get your 2019 Volkswagen Golf Alltrack set up to tow your small utility trailer, and I'll detail all the parts you need, starting with the trailer hitch that fits, which is from Curt: - Curt Trailer Hitch Receiver # C11422 This hitch will fit your '19 Alltrack and is a really nice option because it has a concealed crosstube so the only thing showing is the receiver, which helps your VW keep its factory appearance. The other things you will need are a wiring harness and...
  view full answer...
• Trailer Hitch Options for a 2005 Audi Allroad Quattro
  The Curt Trailer Hitch Receiver part # C11166 as you mentioned is rated for a maximum trailer weight capacity up to 2,000 lbs therefore, I cannot recommend you use this to tow your 2,475 lb trailer. The maximum trailer weight capacity of this hitch cannot be increased by using a class II ball mount like the Curt Class II Euro Style Drawbar part # C45572 sadly. Unfortunately, we do not have any option for you to tow over 2,000 lbs with your Audi as none of the trailer hitch manufactures...
  view full answer...
• Towing Capacity and Hitch Recommendation for 2013 Honda Accord Coupe and CVT Transmission
  According to the online copy of your owner's manual, your 2013 Honda Accord Coupe has a maximum total trailer weight limit of 1,000 lbs. This includes the weight of the trailer, cargo, and everything inside or loaded on top of it. While CVT (continuous variable transmission) vehicles aren't ideal for trailer towing, as long as you adhere to the limits outlined in your owner's manual, you shouldn't have any problems. I suggest confirming this information on your hard copy of the owner's...
  view full answer...
  
• Trailer Hitch Receiver For 2002 Volvo V70 XC / XC70
  So your 2002 Volvo XC70 is also known a Volvo V70 XC and that is how it is categorized by the manufacturer. I Recommend the Curt Trailer Hitch Receiver # C12318 for your Volvo that is rated to tow 3300lbs .This is designed to fit all models of the 2002 V70. It is a Class II hitch with a 1-1/4" receiver for trailer towing or adding bike racks or cargo carriers. If you are pulling a trailer you will need a Hopkins Active Tail Light Converter with Install Kit # 46255 to give you a 4-way...
  view full answer...
• Does 2017 Chevy Cruze Diesel Have Towing Capacity and Parts Needed to Tow Small Trailer
  I took a look at the owner's manual for your 2017 Chevy Cruze and on page 261 it states "The vehicle is neither designed nor intended to tow a trailer" so I cannot recommend you do so, though the decision is of course up to you. If you do decide to tow, then you will absolutely want to go with the lightest, smallest of the trailers. For a diesel model of '17 Cruze the available trailer hitch from Curt is part # C11492, and since you mentioned 2" ball I assume you are also using the Euro...
  view full answer...
  
• Curt Trailer Hitch for 2006 Toyota Prius
  For a 2006 Toyota Prius I suggest the Curt Trailer Hitch Receiver, # C11468. This is a confirmed fit for all trim levels of the 2006 Toyota Prius. This is a Class I hitch with a maximum gross trailer weight of 2,000 lbs. and a maximum tongue weight of 200 lbs. It has a 1-1/4" x 1-1/4" receiver opening. If you will be doing some light towing and not use hitch only for accessories such as a bike rack, you will need wiring for the trailer lights. I suggest the T-One Vehicle Wiring...
  view full answer...
• Comparing Actual Height Rise of Curt Class II Euro Ball Mounts C45572 and C45562
  The nature of the Euro ball mount design, which has a curved shank and a shorter actual ball height than a free-standing hitch ball like # 19258, can allow for multiple interpretations of the actual rise. Not to worry. What I did for you was go to our warehouse and measure these two items. For the time being please ignore the specs and if you would use the following dimension I took on each ball mount. What I did was measure the distance from the TOP of the square shank to the TOP of the...
  view full answer...
• Parts Needed To Tow a Trailer and Haul a Cargo Carrier With a 2016 Honda Civic Sedan
  Currently, a class I receiver like the Curt # C11604 that is rated for 200lbs of tongue weight and towing up to 2,000lbs is the only receiver available for your 2016 Honda Civic Sedan. There is not a receiver capable of supporting the weight of your Curt carrier fully loaded behind your Civic and this is most likely due to the structure under your Civic not being able to support the weight. The 19x47 Curt Cargo Carrier # C18110 will fit the class I receiver for your Civic. You will only...
  view full answer...
• Parts Needed to Tow a Boat Trailer with a 2017 Honda HR-V
  I'll be happy to help you get your 2017 Honda HR-V setup for towing a boat trailer! Whenever a 2" hitch receiver is available for a vehicle I usually recommend going that route just because it allows you to use a wider variety of accessories. So for a hitch I recommend using the EcoHitch # 306-X7322 which has the 2" receiver and a hidden crosstube, however since I know that pricing is always a factor if you wanted something a little more cost-effective I recommend the Curt Trailer Hitch...
  view full answer...
• Mounting Dimensions For Curt Trailer Hitch Receiver # C12123
  The Curt Trailer Hitch Receiver # C12123 has mounting holes that are separated 38-1/2" from drivers to passenger side on center. The lower mounting hole sits 2-3/4" below the upper mounting hole and they are separated 7-3/4" on the same horizontal line. This receiver is custom fit for the 2014-2022(current model year) Ford Transit Connect. I have included a image below with the measurements as well. Curt does recommend using either the 1-7/8" # C45571 or 2" # C45572 Euro Drawbar with this...
  view full answer...
  
• Which Trailer Hitch Fits 2014 Mercedes E-350 and Has Capacity for PWC Trailer
  For your 2014 Mercedes E350 Sedan the Curt hitch part # C11001 is a confirmed fit. The hitch itself has the capacity needed to tow a trailer with a 825 Sea Doo PWC, but you would need to check the owners manual of your vehicle to determine the vehicle's towing capacities and be sure to stay under them as well. For a ball mount you would want part # C45572 for a 2 inch hitch ball or the part # C45571 for a 1-7/8 inch ball. For trailer wiring you then would want the Tekonsha kit part #...
  view full answer...
• Ball Mount Recommendation for a Factory Trailer Hitch on a 2011 Toyota Sienna
  On hitches that we have installed on a 2011 Toyota Sienna, we have found that the distance from the center of the hitch pin hole straight back to clear the rear bumper measured approximately 5-1/4 inches. I do not know what the factory installed hitch measurement is, so you will want to measure from the center of the hitch pin hole back to the distance required to clear the rear bumper. The Curt Euro-Style ball mount, # C45572, measures 7-1/4 inches from the center of the hitch pin hole...
  view full answer...
• Trailer Hitch for 2011 Toyota Camry XLE Non-Hybrid
  For the 2011 Toyota Camry non-hybrid version we offer a 1-1/4-inch Class II hitches from several manufacturers and you can see all on the linked page. I recommend the Curt # C12343 because it costs less than the other options and because it requires no drilling for installation. An installation video and the written instructions are linked for you. The only special tool required to install the hitch is a torque wrench like # ALL944001. If you also need a 4-pole trailer wiring harness for...
  view full answer...
• Trailer Hitch Receiver and 4-Way Vehicle Wiring Harness For a 2024 Mini Countryman
  Yes, we have the Curt Trailer Hitch Receiver # C11522 which is custom fit for your 2024 Mini Countryman. This will give you a class I receiver for a Ball Mount # C45572 or hitch mounted accessory. I recommend installing the Curt Powered Tail Light Converter # C59236 when you install the receiver. This will give you a 4-way flat connection which is the most commonly used connector for small trailers. It will also allow for Auxiliary Lights # C53201 with any hitch mounted accessory which...
  view full answer...
  
• Recommended Trailer Hitch Receiver and Wiring Harness For Trailer Towing With a 2008 VW GTI
  I recommend the Curt Trailer Hitch Receiver # C11074 for your 2008 Volkswagen GTI. I checked with Draw-Tite, EcoHitch and Stealth as they make the hidden receivers and none of them have anything to fit your GTI. The Curt does have a small 1-1/4" receiver that will keep the receiver up tight against your rear fascia and have the least impact on ground clearance. The receiver itself is rated to tow up to 2,000lbs with a 200lb tongue weight rating. Curt recommends their 2" Euro Ball Mount...
  view full answer...
• Dimensions of the Curt Class II Euro Style Drawbar part # C45572
  Yes, I attached the requested diagram.
  view full answer...
  
• Trailer Hitch and Wiring Recommendation for 2010 Ford Mustang
  The Curt hitch part # C11048 is a confirmed fit for your 2010 Ford Mustang GT and will be a great hitch to use. For trailer wiring you then would want the part # C56088 which is a confirmed fit too. I attached install videos for both these products. For a ball mount you then would want the part # C45572.
  view full answer...