Dimensions for the Weight Safe Carrying Case

Question

Question:

What are the dimensions of the storage case?

asked by: Patrick N

0

Expert Reply:

Hey Patrick, thanks for reaching out!

The Weigh Safe Carrying Case # WS48ZR is 17" x 17" x 6", so it's nice and compact to fit in a lot of different places.

Where do you plan to keep the case?

expert reply by: Josh B

0

Ron A.

1/17/2026

I liked the weight gauge, I pulled from Tulsa to OKC with adequate weight on my F350 with a UHaul 6x16 enclosed trailer. Then East through Tennessee and then through mountains to Princeton New Jersey. I added a 3” collar to stop rattles and was pleased with the hitch. Carrying case is very handy for 2” small trailers and 2.5” ball for 20’ equipment trailer. Locks on hitch are a definite plus also. Dealer in Tulsa and in New Jersey both liked the weight Guage feature!

Josh B.

1/19/2026

@RonA that's quite the trip! I've been to Princeton a few times, Princeton University's campus is impressive. Definitely recommend checking it out if you get the chance. Thank you for the feedback, it will help our neighbors make the right decisions for their setup!

Answer 1

The best solution as you alluded to is to bypass the factory "Smart Tow" trailer package which is what is responsible for only sending power to the 12 volt pin when the vehicle is in gear. This is actually pretty easy to do and we have a…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Dimensions for the Weight Safe Carrying Case

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching